相似文献/References:
[1]时刚,田新涛.工程卡车行驶引发地面振动特性研究[J].郑州大学学报(工学版),2020,41(05):76.[doi:10.13705/j.issn.1671-6833.2020.03.017]
SHI Gang,TIAN Xintao.Research on Ground Vibration Characteristics Caused by Engineering Truck Driving[J].Journal of Zhengzhou University (Engineering Science),2020,41(02):76.[doi:10.13705/j.issn.1671-6833.2020.03.017]
[2]戴逸飞,杨 平,王 宁,等.交叠车站下穿段MJS加固温度场变化规律研究[J].郑州大学学报(工学版),2023,44(01):103.[doi:10.13705/j.issn.1671-6833.2022.04.002]
DAI Yifei,YANG Ping,WANG Ning,et al.Study on Temperature Field Variation Law of MJS Reinforcement for Underpass Section of Overlapping Station[J].Journal of Zhengzhou University (Engineering Science),2023,44(02):103.[doi:10.13705/j.issn.1671-6833.2022.04.002]
[3]王定标,万方方,周俊杰..蒸发式冷凝器异型扁管性能分析及数值模拟[J].郑州大学学报(工学版),2010,31(02):67.
WANG Dingbiao,WANG Fangfang,Zhou Junjie.Performance Analysis and Numerical Simulation of EvaporativeCondenser with Special—-shaped Flat Tube[J].Journal of Zhengzhou University (Engineering Science),2010,31(02):67.
[4]董其伍,王烨,刘敏珊..流动冲击角对流体绕流管束换热的影响[J].郑州大学学报(工学版),2010,31(02):0.
DONG Qiwu,WANG Ye,LIU Minshan.Influence of Flowing Impact Angle Heat Transfer in Fluid Flowing Across Tube Bundles[J].Journal of Zhengzhou University (Engineering Science),2010,31(02):0.
[5]王丹,董其伍,刘敏珊..管壳式换热器模块综合模拟方法研究[J].郑州大学学报(工学版),2010,31(03):20.
WANG Dan,DONG Qiwu,LIU Minshan.Study on Module Synthesis Simulation Method forShell-and-Tube Heat Exchanger[J].Journal of Zhengzhou University (Engineering Science),2010,31(02):20.
[6]李成,马志垒,王永涛..冲击荷载下防弹钢板三维损伤分析[J].郑州大学学报(工学版),2010,31(04):85.[doi:10.3969/j.issn.1671-6833.2010.04.021]
[7]王定标,雷风林,向飒,等.汽轮机末级变工况三维数值模拟与叶型改进设计[J].郑州大学学报(工学版),2010,31(05):1.[doi:10.3969/j.issn.1671-6833.2010.05.001]
[8]张兆宁,贺拴海,赵煜..基于应力控制箱梁截面设计数值模拟分析[J].郑州大学学报(工学版),2010,31(06):65.[doi:10.3969/j.issn.1671-6833.2010.06.016]
[9]汪磊,李涛..海底隧道穿越断层破碎带预注浆加固稳定性分析[J].郑州大学学报(工学版),2010,31(06):73.[doi:10.3969/j.issn.1671-6833.2010.06.018]
[10]魏新利,张富强,简士钊,等.以制冷剂R22为工质的地板辐射采暖模拟与优化[J].郑州大学学报(工学版),2011,32(02):6.[doi:10.3969/j.issn.1671-6833.2011.02.002]