[1]杨卫忠,王丽,张世红,等.垫块下砌体局部受压承载力计算[J].郑州大学学报(工学版),1999,20(04):29-32.[doi:10.3969/j.issn.1671-6833.1999.04.009]
 Yang Weizhong,WANG Li,ZHANG Shihong,et al.Calculation of the local compressive bearing capacity of the masonry under the pad[J].Journal of Zhengzhou University (Engineering Science),1999,20(04):29-32.[doi:10.3969/j.issn.1671-6833.1999.04.009]
点击复制

垫块下砌体局部受压承载力计算()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
20
期数:
1999年04期
页码:
29-32
栏目:
出版日期:
1999-01-01

文章信息/Info

Title:
Calculation of the local compressive bearing capacity of the masonry under the pad
作者:
杨卫忠王丽张世红等.
郑州工业大学土木建筑工程学院,河南,郑州,450002, 河南省建设总公司设计院,河南,郑州,450003:, 河南省电影放映公司,河南,郑州,450000, 河南省长垣市建筑设计室,河南,长垣,453400
Author(s):
Yang Weizhong; WANG Li; ZHANG Shihong; etc
关键词:
砌体结构 刚性垫块 局部受压:承载力
Keywords:
DOI:
10.3969/j.issn.1671-6833.1999.04.009
文献标志码:
A
摘要:
分析了现行砌体结构设计规范中关于垫块下砌体局部受压承载力计算公式的不足,基于偏心受压砌体受力的特点,对现有受压砌体的应力-应变关系进行了修正,并提出砌体偏心受压时的应力-应变关系;利用平截面假定和截面平衡务件,推导出刚性垫块下砌体局部受压承载力计算公式,该式具有计算简单、概念清楚等特点,并能与梁端砌体局部受压承载力的计算相协调,且计算结果与试验结果吻合较好.其结果对砌体的受压承载力分析也有参考作用,可供砌体结构设计规范修订时参考,
Abstract:
The shortcomings of the calculation formula for the local compressive bearing capacity of masonry under the pad were analyzed in the current masonry structure design code, and the stress-strain relationship of the existing compressed masonry was revised based on the characteristics of eccentric compression masonry, and the stress-strain relationship when the masonry was eccentrily compressed. Using the flat section assumption and cross-section balance member, the calculation formula of local compressive bearing capacity of masonry under rigid pad is derived, which has the characteristics of simple calculation and clear concept, and can be coordinated with the calculation of local compressive bearing capacity of beam end masonry, and the calculation results are in good agreement with the test results. The results also have a reference effect on the analysis of the compressive bearing capacity of masonry, which can be used as a reference for the revision of masonry structure design specifications.

相似文献/References:

[1]杨卫忠,刘伟..砌体受压承载力计算[J].郑州大学学报(工学版),2003,24(04):50.[doi:10.3969/j.issn.1671-6833.2003.04.012]
 Yang Weizhong,Liu Wei.Calculation of the compressive bearing capacity of masonry[J].Journal of Zhengzhou University (Engineering Science),2003,24(04):50.[doi:10.3969/j.issn.1671-6833.2003.04.012]
[2]赵雷,马亚丽,王东炜,等.多遇地震下砖砌体结构的随机性分析[J].郑州大学学报(工学版),2001,22(01):74.[doi:10.3969/j.issn.1671-6833.2001.01.021]
 ZHAO Lei,Mayali,Wang Dongwei,et al.Stochastic analysis of brick masonry structure under earthquakes[J].Journal of Zhengzhou University (Engineering Science),2001,22(04):74.[doi:10.3969/j.issn.1671-6833.2001.01.021]
[3]杨卫忠.砌体局部均匀受压强度计算[J].郑州大学学报(工学版),1998,19(01):64.
 [J].Journal of Zhengzhou University (Engineering Science),1998,19(04):64.
[4]王新玲,刘立新.关于砌体结构中偏心距计算的讨论[J].郑州大学学报(工学版),1994,15(01):40.
 Wang Xinling,Liu Lixin.Discussion on the calculation of eccentric distance in the masonry structure[J].Journal of Zhengzhou University (Engineering Science),1994,15(04):40.

更新日期/Last Update: 1900-01-01