[1]王光龙,张芳军,张宝林..固体硫酸脲的研究[J].郑州大学学报(工学版),2006,27(04):32-35.[doi:10.3969/j.issn.1671-6833.2006.04.009]
 Wang Guanglong,ZHANG Fangjun,Zhang Baolin.Study of solid urea sulfate [J].Journal of Zhengzhou University (Engineering Science),2006,27(04):32-35.[doi:10.3969/j.issn.1671-6833.2006.04.009]
点击复制

固体硫酸脲的研究()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
27
期数:
2006年04期
页码:
32-35
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Study of solid urea sulfate

作者:
王光龙张芳军张宝林.
郑州大学化工学院,河南,郑州,450001, 郑州大学化工学院,河南,郑州,450001, 郑州大学化工学院,河南,郑州,450001
Author(s):
Wang Guanglong; ZHANG Fangjun; Zhang Baolin
关键词:
硫酸脲 制备 影响因素 物性
Keywords:
DOI:
10.3969/j.issn.1671-6833.2006.04.009
文献标志码:
A
摘要:
研究了硫酸脲制备过程中可控主要因素的影响以及固体硫酸脲的晶体形状、X射线衍射图、吸湿性和水溶液的酸性.实验表明,硫酸脲制备过程中的主要影响因素为:尿素、硫酸的比例、反应温度及硫酸浓度等,其中n(尿素)∶n(硫酸)=2∶1,反应温度为80℃,硫酸质量分数为95%~98%,显微镜下观测其晶体呈六棱柱状.X射线衍射图表明:生成物与可能生成的物质的X射线衍射图完全不同,吸湿性与时间呈直线关系,水溶液的酸性较同等浓度的硫酸弱而比柠檬酸强.以上反应条件下可以制备出性质稳定、成本较低的固体硫酸脲.
Abstract:
The influence of controllable main factors in the preparation of urea sulfate, as well as the crystal shape, X-ray diffraction pattern, hygroscopicity and acidity of the aqueous solution of the solid urea sulfate were studied. Experiments show that the main influencing factors in the preparation of urea sulfate are: the ratio of urea and sulfuric acid, reaction temperature and sulfuric acid concentration, among which n(urea)∶n(sulfuric acid)=2∶1, the reaction temperature is 80 °C, the mass fraction of sulfuric acid is 95%~98%, and its crystals are hexaprism under microscopy. The X-ray diffraction pattern showed that the X-ray diffraction pattern of the product and the possible generated substance was completely different, the hygroscopicity was linear with time, and the acidity of the aqueous solution was weaker than that of the same concentration of sulfuric acid and stronger than citric acid. Under the above reaction conditions, solid urea sulfate with stable properties and low cost can be prepared.

相似文献/References:

[1]詹予忠,陈宜俍,徐军,等.新型催化材料氮化磷酸铝的制备研究[J].郑州大学学报(工学版),2005,26(03):4.[doi:10.3969/j.issn.1671-6833.2005.03.002]
 Zhan Yuzhong,CHEN Yiliang,XU Jun,et al.Research on the preparation of a new catalytic material aluminum nitride phosphate[J].Journal of Zhengzhou University (Engineering Science),2005,26(04):4.[doi:10.3969/j.issn.1671-6833.2005.03.002]
[2]李惠萍,蒋登高,张建华,等.光稳定剂中间体2-氯-4,6-二(2,2,6,6-四甲基-4-哌啶氧基)-1,3,5-三嗪的制备[J].郑州大学学报(工学版),2002,23(02):20.[doi:10.3969/j.issn.1671-6833.2002.02.006]
 LI Huiping,Jiang Denggao,ZHANG Jianhua,et al.Preparation of light stabilizer intermediate 2-chloro-4,6-bis(2,2,6,6-tetramethyl-4-piperidinyloxy)-1,3,5-triazine[J].Journal of Zhengzhou University (Engineering Science),2002,23(04):20.[doi:10.3969/j.issn.1671-6833.2002.02.006]
[3]刘金盾,高爱环,万亚珍,等.聚砜超滤膜的制备及其表征[J].郑州大学学报(工学版),2002,23(03):1.[doi:10.3969/j.issn.1671-6833.2002.03.001]
 LIU Jindun,High Love Ring,Wan Yazhen,et al.Preparation and characterization of polysulfone ultrafiltration membranes[J].Journal of Zhengzhou University (Engineering Science),2002,23(04):1.[doi:10.3969/j.issn.1671-6833.2002.03.001]
[4]刘金盾,高爱环,万亚珍,等.纳滤技术及高分子纳滤膜的制备[J].郑州大学学报(工学版),2001,22(04):34.[doi:10.3969/j.issn.1671-6833.2001.04.010]
 LIU Jindun,High Love Ring,Wan Yazhen,et al.Nanofiltration technology and preparation of polymer nanofiltration membrane[J].Journal of Zhengzhou University (Engineering Science),2001,22(04):34.[doi:10.3969/j.issn.1671-6833.2001.04.010]
[5]詹予忠,徐军,陈宜倐,等.氮化磷酸铝的制备及结构特征[J].郑州大学学报(工学版),1999,20(02):15.[doi:10.3969/j.issn.1671-6833.1999.02.005]
 Zhan Yuzhong,XU Jun,CHEN Yiyi,et al.Preparation and structural characteristics of aluminum nitride phosphate[J].Journal of Zhengzhou University (Engineering Science),1999,20(04):15.[doi:10.3969/j.issn.1671-6833.1999.02.005]
[6]马烽,王芬,刘先桥,等.新型表面活性剂烷基多苷制备方法研究进展[J].郑州大学学报(工学版),1999,20(02):77.[doi:10.3969/j.issn.1671-6833.1999.02.025]
 Ma Feng,WANG Fen,Liu Xianqiao,et al.Research progress on the preparation method of new surfactant alkyl polyglycosides[J].Journal of Zhengzhou University (Engineering Science),1999,20(04):77.[doi:10.3969/j.issn.1671-6833.1999.02.025]
[7]李永峰,陈宜倐,徐军,等.Cu/SiO2加氢催化剂的载体的扩孔处理研究[J].郑州大学学报(工学版),1999,20(04):71.[doi:10.3969/j.issn.1671-6833.1999.04.023]
 LI Yongfeng,CHEN Yiyi,XU Jun,et al.Research on reaming of Cu/SiO2 hydrogenation catalyst support[J].Journal of Zhengzhou University (Engineering Science),1999,20(04):71.[doi:10.3969/j.issn.1671-6833.1999.04.023]

更新日期/Last Update: 1900-01-01