[1]杨二冰,王杰民..铝基体上化学镀Ni-Co-P的工艺研究[J].郑州大学学报(工学版),2008,29(02):55-58.[doi:10.3969/j.issn.1671-6833.2008.02.014]
 Yang Erbing,Wang Jiemin.Research on the process of electroless plating of Ni-Co-P on aluminum matrix[J].Journal of Zhengzhou University (Engineering Science),2008,29(02):55-58.[doi:10.3969/j.issn.1671-6833.2008.02.014]
点击复制

铝基体上化学镀Ni-Co-P的工艺研究()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
29
期数:
2008年02期
页码:
55-58
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Research on the process of electroless plating of Ni-Co-P on aluminum matrix
作者:
杨二冰王杰民.
郑州大学,化学系,河南,郑州,450001, 河南省中原石油天然气开发总公司,河南,郑州,450007
Author(s):
Yang Erbing; Wang Jiemin
关键词:
化学镀 Ni-Co-P合金 工艺
Keywords:
DOI:
10.3969/j.issn.1671-6833.2008.02.014
文献标志码:
A
摘要:
用苛性钠调节镀液的pH值,通过正交试验初步确定了在铝基体上化学镀Ni-co-P合金的工艺条件:温度为85℃,硼酸5 g·L-1,c(H2PO2-)/c(Ni2+Co2+)摩尔比3,c(Ni2+)/c(Co2+)摩尔比2,络合剂170 g·L-1,络合剂215 g·L-1,加速剂8 g·L-1PH值为8.5.通过极差分析找到了对镀速影响显著的4个因素.进行了镀层的性能测试.
Abstract:
The pH value of the plating bath was adjusted with caustic soda, and the process conditions for electroless plating of Ni-co-P alloy on the aluminum matrix were preliminarily determined by orthogonal test: the temperature was 85 °C, and the boric acid was 5 g· L-1,c(H2PO2-)/c(Ni2+Co2+) molar ratio 3, c(Ni2+)/c(Co2+) molar ratio 2, complexing agent 170 g· L-1, complexing agent 215 g· L-1, accelerator 8 g· The L-1PH value was 8.5.4 factors with significant influence on the plating speed were found through range analysis.

相似文献/References:

[1]汤亚力,高娟,沈宁福,等.化学镀Ni-P非晶及其耐蚀性研究[J].郑州大学学报(工学版),1990,11(03):140.
 Tang Yali,Gao Juan,Shen Ningfu,et al.Research on chemical plating NI-P owress and its corrosion resistance[J].Journal of Zhengzhou University (Engineering Science),1990,11(02):140.

更新日期/Last Update: 1900-01-01