[1]洪小芹,赵志敏,李鹏,等.基于光纤传感的光固化材料临界曝光量测试[J].郑州大学学报(工学版),2009,30(01):78-81.
 HONG Xiaoqin,ZHAO Zhimin,LI Peng,et al.Critical Exposure Test of Light-curable Materials Based on Fiber Optic Sensing[J].Journal of Zhengzhou University (Engineering Science),2009,30(01):78-81.
点击复制

基于光纤传感的光固化材料临界曝光量测试()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
30
期数:
2009年01期
页码:
78-81
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Critical Exposure Test of Light-curable Materials Based on Fiber Optic Sensing
作者:
洪小芹赵志敏李鹏等.
南京航空航天大学,理学院,江苏,南京,210016, 南京航空航天大学,理学院,江苏,南京,210016, 南京航空航天大学,理学院,江苏,南京,210016, 南京航空航天大学,理学院,江苏,南京,210016
Author(s):
HONG Xiaoqin; ZHAO Zhimin; LI Peng; etc
Key Laboratory of Advanced Functional Materials of China Education Ministry,Beijing University of Technology,Beijing100124,China
关键词:
光固化材料 临界曝光量 曝光时间 光纤传感
Keywords:
light-curing materials critical exposure exposure time Fiber optic sensing
文献标志码:
A
摘要:
采用自制的光固化材料制作了光导纤维作为传感段,两端分别与光纤耦联后埋入光固化材料中,构成光纤折射率传感器.以He-Ne激光输入光纤,输出端采用光电探测器接收光功率,固化过程中,传输光的衰减程度表征了光固化材料的固化情况.实验测得该光固化材料的临界曝光量为193.8 s·mw/cm2.实验结果表明,采用该方法能够较精确测量光固化材料固化一定深度的曝光时间,简单易行,为实时监测光固化材料的固化程度提供一种新方法.
Abstract:
The optical fiber is made of self-made light-curing material as the sensing section, and the two ends are coupled with the optical fiber and buried in the light-curing material to form the optical fiber refractive index sensor. With He-Ne laser input fiber, photodetector is used at the output end to receive optical power, and the degree of attenuation of transmitted light characterizes the curing of light-curing materials during the curing process. The critical exposure of the light-curable material was measured as 193.8 s·mw/cm2. The experimental results show that this method can accurately measure the exposure time of the light-curable material at a certain depth, which is simple and easy, and provides a new method for real-time monitoring of the curing degree of the light-curable material.
更新日期/Last Update: 1900-01-01