[1]尚同羊,张苛,高涛涛,等.橡胶沥青应力吸收层设计方法探讨[J].郑州大学学报(工学版),2013,34(02):40-44.[doi:10.3969/j.issn.1671-6833.2013.02.011]
　SHANG Tong-yang,ZHANG Ke,GAO Tao-tao,et al.Study on Asphalt Rubber Stress Absorbing Membrane Interlayer( SAMI)Design[J].Journal of Zhengzhou University (Engineering Science),2013,34(02):40-44.[doi:10.3969/j.issn.1671-6833.2013.02.011]
点击复制

橡胶沥青应力吸收层设计方法探讨()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
34
期数:
2013年02期
页码:
40-44
栏目:
出版日期:
2013-03-28

文章信息/Info

Title:
Study on Asphalt Rubber Stress Absorbing Membrane Interlayer( SAMI)Design
作者:
尚同羊; 张苛; 高涛涛; 等.
陕西高速机械化工程有限公司,陕西西安,710038, 长安大学特殊地区公路工程教育部重点实验室,陕西西安,710064, 重庆能源职业学院,重庆,400041
Author(s):
SHANG Tong-yang1; ZHANG Ke2; GAO Tao-tao3; ZHANG Zheng-qi2
1.Shaanxi High-speed Mechanical Engineering Co. Ld，Xi’ an 710038,China; 2.Key Laboratory of Highway Engineering inSpecial Reion of Ministry of Education，Chang’an University , Xi ’ an 710064，China;3.Chongqing Energy College ,Chongqing 400041 ，China
关键词:
橡胶沥青应力吸收层;  层间抗剪强度;  沥青洒布量;  碎石撒布量
Keywords:
asphalt rubber stress absorbing membrane interlayer;  interlaminar anti-shear strength;  asphaltspraying content;  gravel spreading amount
分类号:
U414
DOI:
10.3969/j.issn.1671-6833.2013.02.011
文献标志码:
A
摘要:
为了完善橡胶沥青应力吸收层设计方法,在分析应力吸收层功能的基础上,针对水泥混凝土路面上加铺沥青层容易出现层间粘结不牢和层间滑移等问题,提出基于层间抗剪强度的应力吸收层材料组成设计方法.研究了沥青种类、沥青洒布量及碎石撒布量对层间抗剪强度的影响,探讨了橡胶沥青应力吸收层设计方法.研究结果表明:层间抗剪强度随碎石撒布量和沥青洒布量的增加均呈先增大后减小的趋势,在碎石撒布量为14 kg/m2,沥青洒布量为2.2 kg/m2时达到最大抗剪强度.推荐橡胶沥青应力吸收层的最佳橡胶沥青洒布量为2.2～2.4 kg/m2,最佳碎石用量为13.5～14.5 kg/m2.
Abstract:
In order to improve the design method of the asphalt rubber stress absorbing membrane interlayer,the asphalt rubber SAMl material composition design method was studied based on the analysis of the functionsof SAMIl and the problems of interlaminar bonding between asphalt concrete overlay and cement concrete pave-ment is not strong and cutting slippage. In this method, the interlaminar anti-shear strength was taken as de-sign index. The paper studied the influence of asphalt types,asphalt spraying content and gravel spreading a-mount on interlaminar anti-shear strength and discussed the asphalt rubber SAMI design method. The resultsshow that the trend of interlaminar anti-shear strength is first increasing and then decreasing with the increaseof gravel spreading amount and asphalt spraying content，reaching the maximum at the gravel spreading a-mount of 14 kg/m3and at the asphalt spraying content of 2.2 kg/ m2. Recommendations for the optimum as-phalt rubber spraying content and gravel spreading amount of asphalt rubber SAMI are 2.2 kg/m3’~- 2.4 kg/m2and 13.5 kg/m2~14.5 kg/ m3respectively.
更新日期/Last Update: 1900-01-01