[1]侯俊剑,房占鹏,何文斌.基于位移响应最小化的约束阻尼结构优化设计[J].郑州大学学报(工学版),2017,38(03):87-91,96.[doi:10.13705/j.issn.1671-6833.2016.06.012]
　Hou Junjian,Fang Zhanpeng,He Wenbin.Structure Optimization Design of Constrained Layer Damping Structures Based on Dynamic Displacement Response[J].Journal of Zhengzhou University (Engineering Science),2017,38(03):87-91,96.[doi:10.13705/j.issn.1671-6833.2016.06.012]
点击复制

基于位移响应最小化的约束阻尼结构优化设计()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
38
期数:
2017年03期
页码:
87-91,96
栏目:
出版日期:
2017-05-28

文章信息/Info

Title:
Structure Optimization Design of Constrained Layer Damping Structures Based on Dynamic Displacement Response
作者:
侯俊剑; 房占鹏; 何文斌
郑州轻工业学院机电工程学院,河南郑州,450002
Author(s):
Hou Junjian; Fang Zhanpeng; He Wenbin
School of Mechanical and Electrical Engineering, Zhengzhou Institute of Light Industry, Zhengzhou, Henan, 450002
关键词:
约束阻尼; 拓扑优化; 灵敏度; 位移响应
Keywords:
DOI:
10.13705/j.issn.1671-6833.2016.06.012
文献标志码:
A
摘要:
针对约束阻尼结构的动力学拓扑优化问题,基于实体各向同性材料惩罚模型(SIMP插值模型),以约束阻尼结构位移响应最小化为优化目标,约束阻尼材料使用量为约束条件,建立了约束阻尼结构位移响应拓扑优化模型.在位移响应的灵敏度分析时,将模态阻尼比的灵敏度引入到优化目标的灵敏度分析中,使优化目标的灵敏度计算更加准确合理.采用移动渐近线法(MMA)对拓扑优化模型进行求解.通过算例分析,验证了提出的约束阻尼结构的动力学优化算法的正确性和有效性.
Abstract:
The Solid Isotropic Material with Penalization (SIMP) was applied to establish the topology optimization model of constrained layer damping (CLD) structure.The minimum of displacement response was considered as the objective function and the volume fraction of constrained layer damping material as constrained conditions.The sensitivity of modal damping ratio was introduced in the sensitivity analysis of the objective function,making the sensitivity more accurate and sensible.The topology optimization model was solved by Method of Moving Asymptotes (MMA).The numerical examples demonstrated that the proposed dynamics optimization of CLD structure was of validity and effectiveness.

相似文献/References:

[1]杜鹏.大型箱体零件结构拓扑优化设计研究[J].郑州大学学报(工学版),2016,37(02):82.[doi:10.3969/j.issn.1671-6833.201505028]
　Qin Dongchen,Du Peng.A Research for Structural Design of Large-scale Box Parts Based on Topology Optimization[J].Journal of Zhengzhou University (Engineering Science),2016,37(03):82.[doi:10.3969/j.issn.1671-6833.201505028]
[2]雷正保,刘助春,廖卓.纯电动汽车白车身耐撞性拓扑优化设计方法[J].郑州大学学报(工学版),2016,37(05):77.[doi:10.13705/j.issn.1671-6833.2016.05.015]
　Lei Zhengbao,Liu Zhuchun,Liao Zhuo.Crashworthiness Topology Optimization Method of Pure Electric Car BIW[J].Journal of Zhengzhou University (Engineering Science),2016,37(03):77.[doi:10.13705/j.issn.1671-6833.2016.05.015]
[3]王定标,王 帅,张浩然,等.流体拓扑优化的方法及应用综述[J].郑州大学学报(工学版),2023,44(02):1.[doi:10.13705/j.issn.1671-6833.2023.02.021]
　WANG Dingbiao,WANG Shuai,ZHANG Haoran,et al.A Review of Methods and Applications for Fluid Topology Optimization[J].Journal of Zhengzhou University (Engineering Science),2023,44(03):1.[doi:10.13705/j.issn.1671-6833.2023.02.021]

更新日期/Last Update: