[1]梅盛开,李松,袁伟,等.基于样件测试法的五轴机床误差辨识方法[J].郑州大学学报(工学版),2021,42(01):94-98.[doi:10.13705/j.issn.1671-6833.2021.01.012]
　MEI Shengkai,LI Song,YUAN Wei,et al.Error Identification Method of Five-axis Machine Tool Based on Sample Test Method[J].Journal of Zhengzhou University (Engineering Science),2021,42(01):94-98.[doi:10.13705/j.issn.1671-6833.2021.01.012]
点击复制

基于样件测试法的五轴机床误差辨识方法()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
42
期数:
2021年01期
页码:
94-98
栏目:
出版日期:
2021-03-14

文章信息/Info

Title:
Error Identification Method of Five-axis Machine Tool Based on Sample Test Method
作者:
梅盛开; 李松; 袁伟; 郭前建
山东理工大学机械工程学院;
Author(s):
MEI Shengkai; LI Song;  YUAN Wei;  GUO Qianjian
School of Mechanical Engineering, Shandong University of Technology, Zibo 255049, China
关键词:
Keywords:
5-axis machine tool;  sample test method;  positioning error;  error model
DOI:
10.13705/j.issn.1671-6833.2021.01.012
文献标志码:
A
摘要:
为了提高五轴机床误差模型的预测能力，本文提出了一种基于样件测试法的五轴机床误差间接测量方法，并完成了阶梯轴样件的优化设计。通过对机床空间误差模型进行反求，建立样件加工误差与机床不同误差项之间的函数解析关系，进而得到了机床不同加工状态的动态误差。通过实验验证该方法的可靠性，结果表明该方法与激光测量结果吻合较好，该方法可以提高五轴机床误差模型的预测能力，从而提高机床的加工精度。
Abstract:
In order to improve the predictive ability of the error model of the five-axis machine tool, an indirect error measurement method of the five-axis machine tool based on the sample test method was proposed, and the optimized design of the stepped axis sample was completed. By inversely calculating the spatial error model of the machine tool, the function analysis relationship between the sample machining error and different error terms of the machine tool was established, and then the dynamic errors of the machine tool in different machining states were obtained. The reliability of the method was verified through experiments. The results showed that the method was in good agreement with the laser measurement results. The method could improve the predictive ability of the error model of the five-axis machine tool, thereby improving the machining accuracy of the machine tool.

参考文献/References:

[1] 郭世杰,姜歌东,梅雪松,等.转台-摆头式五轴机床几何误差测量及辨识[J].光学精密工程,2018,26(11):2684-2694.

[2] HE Z Y, FU J Z, ZHANG L C, et al. A new error measurement method to identify all six error parameters of a rotational axis of a machine tool[J]. International journal of machine tools and manufacture, 2015, 88:1-8.
[3] 张根保, 范秀君. 机床关键几何误差辨识方法研究[J]. 中国机械工程, 2014, 25(7):853-856.
[4] 陈江义,焦利明.基于多学科协同算法的机床主轴优化设计[J].郑州大学学报(工学版),2012,33(2):103-106.
[5] 皮世威,刘强,孙鹏鹏.基于激光干涉仪的旋转轴误差快速检定方法[J].仪器仪表学报,2017,38(10):2484-2491.
[6] 郭前建,赵国勇,程祥,等.双转台五轴机床空间误差补偿技术研究[J].机械工程学报,2016,52(13):189-194.
[7] ALESSANDRO V, GIANNI C, ANTONIO S. Axis geometrical errors analysis through a performance test to evaluate kinematic error in a five axis tilting-rotary table machine tool[J]. Precision engineering, 2015, 39(1):224-233.
[8] 仇健.数控机床切削性能测试典型试件综述[J].制造技术与机床, 2014(9):193-203.
[9] ERKAN T, MAYER J R R, DUPONT Y. Volumetric distortion assessment of a five-axis machine by probing a 3D reconfigurable uncalibrated master ball artefact[J]. Precision engineering, 2011, 35(1):116-125.
[10] LIEBRICH T, BRINGMANN B, KNAPP W. Calibration of a 3D-ball plate[J]. Precision engineering, 2009, 33(1):1-6.
[11] KEAVENEY S, CONNOLLY P, AHEARNE E, et al. Investigation of a multi-cone variant of the standard cone frustum test for 5-axis machine tools[J]. Procedia CIRP, 2014, 14:317-322.
[12] KATO N,TSUTSUMI M,SATO R. Analysis of circular trajectory equivalent to cone-frustum milling in five-axis machining centers using motion simulator[J]. International journal of machine tools and manufacture, 2013, 64:1-11.
[13] 杜丽, 张信, 王伟, 等. “S”形试件的五轴数控机床综合动态精度检测特性研究[J]. 电子科技大学学报, 2014, 43(4):629-635.
[14] IBARAKI S, OTA Y. A machining test to evaluate geometric errors of five-axis machine tools with its application to thermal deformation test[J]. Procedia CIRP, 2014, 14:323-328.
[15] HONG C F,IBARAKI S,MATSUBARA A. Influence of position-dependent geometric errors of rotary axes on a machining test of cone frustum by five-axis machine tools[J]. Precision engineering, 2011, 35(1):1-11.
[16] IBARAKI S, SAWADE M, MATSUBARA A, et al. Machining tests to identify kinematic errors on five-axis machine tools[J]. Precision engineering, 2010, 34(3):387-398.
[17] MCHICHI N A, MAYER J R R. Axis location errors and error motions calibration for a five-axis machine tool using the SAMBA method[J]. Procedia CIRP, 2014, 14:305-310.

更新日期/Last Update: 2021-03-15