[1]孙国栋,江亚杰,徐亮,等.BP网络预测阈值的仪表重影字符识别方法研究[J].郑州大学学报(工学版),2020,41(04):28-33.[doi:10.13705/j.issn.1671-6833.2020.04.011]
 SUN Guodong,JIANG Yajie,XU Liang,et al.Study on Instrument Ghosting Character Recognition Method for Predicting Binarization Threshold by BP Network[J].Journal of Zhengzhou University (Engineering Science),2020,41(04):28-33.[doi:10.13705/j.issn.1671-6833.2020.04.011]
点击复制

BP网络预测阈值的仪表重影字符识别方法研究()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
41
期数:
2020年04期
页码:
28-33
栏目:
出版日期:
2020-08-12

文章信息/Info

Title:
Study on Instrument Ghosting Character Recognition Method for Predicting Binarization Threshold by BP Network
作者:
孙国栋江亚杰徐亮胡也席志远
湖北工业大学机械工程学院
Author(s):
SUN GuodongJIANG YajieXU LiangHU YeXI Zhiyuan
School of Mechanical Engineering, Hubei University of Technology
关键词:
光照不均重影字符识别预测阈值LeNet-5BP神经网络
Keywords:
uneven illuminationghost imagecharacter recognitionprediction thresholdLeNet-5BP neural network中图分类号:TP391.41
DOI:
10.13705/j.issn.1671-6833.2020.04.011
文献标志码:
A
摘要:
仪表数字获取过程中多出现光照不均匀和字符重影现象,导致二值化困难,识别率低等问题,提出了一种新的二值化方法。在对图像二值化之前,由于图像质量不佳,首先需要对图像进行预处理。针对光照不均现象,使用了非线性函数彩色图像校正方法。针对重影现象,以图像的灰度级分布统计量作为输入,自适应二值化全局阈值作为标签训练BP神经网络预测模型,使用训练好的BP网络对图像全局阈值进行预测并二值化,达到分离重影的目的。同时,采用改进LeNet-5网络对分割后的单个字符进行识别。实验表明,提出的二值化方法效果优于经典方法,改进的LeNet-5能够满足分割后的仪表字符识别,其识别率能达到98.94%,单个字符识别时间只需要1.4ms。
Abstract:
During instrument digital image acquisition,there were many phenomena of uneven illumination and character double shadow,which led to the difficulty of binarization and low recognition rate.A new binarization method is proposed.Before image binarization,the image would be preprocessed because of the poor image quality.Due to uneven illumination,the color image correction method based on nonlinear function was used.In view of the imaging ghosting,the image gray scale distribution statistics were taken as the input,and the adaptive binarization global threshold is used as the label of prediction model to train BP neural network.The trained BP network was used to predict the global threshold and binarize the image,in order to achieve the separating the ghosting.At the same time,the improved LeNet-5 network was adopted to recognize the single character after segmentation.The experimental results showed that the proposed binarization method was better than the classical methods,and the improved LeNet-5 could satisfy the instrument character recognition after segmentation,with the recognition rate of 98.94%,and the single character recognition time of only 0.0014s.

参考文献/References:

[1] 孙国栋,梅术正,汤汉兵,等.基于密度特征与KNN算法的最优特征维数选择[J].现代电子技术,2018,41(16):80-83.

[2] 李智成,李文婷,梅术正,等.基于机器视觉的高压计量数显表自动校对系统[J].电测与仪表,2017,54(20):105-109,121.
[3] 李娜.利用灰度变换法增强数字图像[J].北京工业职业技术学院学报,2009,8(3):36-39.
[4] KANDHWAY P,BHANDARI A K,SINGH A.A novel reformed histogram equalization based medical image contrast enhancement using krill herd optimization[J].Biomedical signal processing and control,2020,56:101677.
[5] KIM J Y,KIM L S,HWANG S H.An advanced contrast enhancement using partially overlapped sub-block histogram equalization[J].IEEE transactions on circuits and systems for video technology,2001,11(4):475-484.
[6] 梁琳,何卫平,雷蕾,等.光照不均图像增强方法综述[J].计算机应用研究,2010,27(5):1625-1628.
[7] JIN H,TU L,DENG X.Night image enhancement algorithm based on retinex theory[J].International journal of advancements in computing technology,2011,3(10):291-298.
[8] 董静薇,徐博,马晓峰,等.基于同态滤波及多尺度Retinex的低照度图像增强算法[J].科学技术与工程,2018,18(22):238-242.
[9] 任崇巍.基于双边滤波和Retinex算法的货车图像预处理方法[J].现代城市轨道交通,2019(6):39-43.
[10] 刘健,郭潇,徐鑫龙,等.基于Retinex理论的低照度图像增强技术[J].火力与指挥控制,2019,44(9):139-143.
[11] WANG W C,CHEN Z X,YUAN X H,et al.Adaptive image enhancement method for correcting low-illumination images[J].Information sciences,2019,496:25-41.
[12] 查刘根,谢春萍.应用四层BP神经网络的棉纱成纱质量预测[J].纺织学报,2019,40(1):52-56,61.
[13] 夏克文,李昌彪,沈钧毅.前向神经网络隐含层节点数的一种优化算法[J].计算机科学,2005,32(10):143-145.
[14] 冉成科,夏向阳,杨明圣,等.基于日类型及融合理论的BP网络光伏功率预测[J].中南大学学报(自然科学版),2018,49(9):2232-2239.
[15] 范伟,林瑜阳,李钟慎.基于BP神经网络的压电陶瓷蠕变预测[J].计量学报,2017,38(4):429-434.
[16] 李标,王磊,朱金营,等.BP网络训练函数选取及其岩土工程应用分析[J].西部探矿工程,2008,20(10):58-60.
[17] 李少辉,周军,刘波,等.基于机器视觉和神经网络的低质量文本识别研究[J].机电工程,2018,35(9):1006-1010.

更新日期/Last Update: 2020-10-06