[1]王利霞,刘春太,刘晓峰,等.注塑模流动分析[J].郑州大学学报(工学版),1995,16(02):104-111.
　Wang Lixia,Liu Chun,Liu Xiaofeng,et al.Injection mold flow analysis[J].Journal of Zhengzhou University (Engineering Science),1995,16(02):104-111.
点击复制

注塑模流动分析()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
16卷
期数:
1995年02期
页码:
104-111
栏目:
出版日期:
1995-02-28

文章信息/Info

Title:
Injection mold flow analysis
作者:
王利霞; 刘春太; 刘晓峰; 申长雨
郑州工学院
Author(s):
Wang Lixia;  Liu Chun;  Liu Xiaofeng;  Shen Changyu
Zhengzhou Institute of Technology
关键词:
注塑模; 注射成型; 塑料; 流动分析
Keywords:
Injection molding;  injection molding;  plastic;  flow analysis
文献标志码:
A
摘要:
本文基于流变学基本方程，采用合理简化，得到注塑模三维薄壁型腔充填过程中的非弹性，非牛顿流体在非等温状态下的Ｈｅｌｅ一ｓｈａｗ模型及浇注系统充填过程中的数学模型，并采用混合有限元／有限差分数值方法，进行注塑模流动分析。
Abstract:
This article is based on the basic equation of the flow change and uses reasonable simplification to obtain the non -elasticity in the processing of the three -dimensional thin -walled cavity of the injection molding mold. Non -Newtonian fluids in the HELE One SHAW model and pouring system filling the mathematical model in the non -temperature state, and use the hybrid finite element / limited number method to perform injection molding flow analysis.

相似文献/References:

[1]余晓容,袁峰,李银亭,等.注塑模充填模式的快速预测[J].郑州大学学报(工学版),2004,25(02):11.[doi:10.3969/j.issn.1671-6833.2004.02.003]
　Yu Xiaorong,YUAN Feng,LI Yinting,et al.Fast prediction of injection mold filling patterns[J].Journal of Zhengzhou University (Engineering Science),2004,25(02):11.[doi:10.3969/j.issn.1671-6833.2004.02.003]
[2]逯晓勤,曹伟,余晓容,等.注塑模 Z-MOLD 系统中的曲面求交算法[J].郑州大学学报(工学版),1998,19(03):23.
　Wu Xiaoqin,Cao Wei,Yu Xiaorong,et al.The curved surface sequential algorithm in the injection molding model Z-MOLD system[J].Journal of Zhengzhou University (Engineering Science),1998,19(02):23.
[3]逯晓勤,王国中,申长雨,等.注塑模结构设计CAD系统开发[J].郑州大学学报(工学版),1996,17(03):44.
　Xiaoqin,Wang Guozhong,et al.Injection molding structure design CAD system development[J].Journal of Zhengzhou University (Engineering Science),1996,17(02):44.
[4]刘春太,陈静波,王利霞,等.注射成型CAE技术的研究进展和发展趋势[J].郑州大学学报(工学版),1996,17(01):118.
　Liu Chun,Chen Jingbo,Wang Lixia,et al.Research progress and development trend of injection molding CAE technology[J].Journal of Zhengzhou University (Engineering Science),1996,17(02):118.

更新日期/Last Update: 1900-01-01