[1]裴钟源.水质分析中绘制标准曲线应建立直线回归方程[J].郑州大学学报(工学版),1989,10(01):63-68.
 [J].Journal of Zhengzhou University (Engineering Science),1989,10(01):63-68.
点击复制

水质分析中绘制标准曲线应建立直线回归方程()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
10
期数:
1989年01期
页码:
63-68
栏目:
出版日期:
1989-03-01

文章信息/Info

作者:
裴钟源
郑州工学院水利系,
关键词:
最小二乘法' target="_blank" rel="external">">最小二乘法直线回归方程相关系数
文献标志码:
A
摘要:
标准曲线在环境监测水质分析中应用相当普遍。本文认为绘制标准曲线应用最小二乘法原理建立直线回归方程,以它所表达的直线是最佳的直线,误差最小。并举例说明建立回归方程运算的程序、方法,以及回归方程的相关分析。

相似文献/References:

[1]左敏,徐泽龙,张青川,等.基于双维度中文语义分析的食品领域知识库问答[J].郑州大学学报(工学版),2020,41(03):8.[doi:10.13705/j.issn.1671-6833.2020.02.003]
 Zuo Min,Xu Zelong,Zhang Qingchuan,et al.A question answering model over food domain knowledge base from two-dimensional Chinese semantic analysis[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):8.[doi:10.13705/j.issn.1671-6833.2020.02.003]
[2]韩华强,陈生水,王占军,等.母岩变形特性差异对堆石料力学性质的影响[J].郑州大学学报(工学版),2020,41(03):67.[doi:10.13705/j.issn.1671-6833.2020.02.017]
 Hanwha StrongChen ShengshuiWang ZhanjunZheng ChengfengFu Hua.Influence of deformation characteristics of mother rock on mechanical properties of rockfill materials[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):67.[doi:10.13705/j.issn.1671-6833.2020.02.017]
[3]张三川,苗帅宾.基于热仿真的动力电池箱结构紧凑化参数优化[J].郑州大学学报(工学版),2020,41(03):37.[doi:10.13705/j.issn.1671-6833.2019.05.020]
 Zhang Sanchuan,Miao Shuaibin.Research on Structural Parameter Design Based on Thermal Simulation for High Density Displacement Power Battery Box[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):37.[doi:10.13705/j.issn.1671-6833.2019.05.020]
[4]乐金朝,张世兴,乐明静,等.不同损伤度和愈合温度条件下沥青胶浆自愈合行为研究[J].郑州大学学报(工学版),2020,41(04):12.[doi:10.13705/j.issn.1671-6833.2019.04.007]
 YUE Jinchao,ZHANG Shixing,YUE Mingjing,et al.Study on Self-healing Behavior of Asphalt Mastic under Different Damage Degree and Healing Temperature[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):12.[doi:10.13705/j.issn.1671-6833.2019.04.007]
[5]欧阳海滨,全永彬,高立群,等.基于混合遗传粒子群优化算法的层次路径规划方法[J].郑州大学学报(工学版),2020,41(04):34.[doi:10.13705/j.issn.1671-6833.2020.01.011]
 OUYANG Haibin,QUAN Yongbin,GAO Liqun,et al.Hierarchical Path Planning Method for Mobile Robots Based on Hybrid Genetic Particle Swarm Optimization Algorithm[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):34.[doi:10.13705/j.issn.1671-6833.2020.01.011]
[6]王丙琛,司怀伟,谭国真.基于深度强化学习的自动驾驶车控制算法研究[J].郑州大学学报(工学版),2020,41(04):41.[doi:10.13705/j.issn.1671-6833.2020.04.002]
 WANG Bingchen,SI Huaiwei,TAN Guozhen.Research on Autopilot Control Algorithms Based on Deep Reinforcement Learning[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):41.[doi:10.13705/j.issn.1671-6833.2020.04.002]
[7]贺占蜀,陈雷,王武军,等.基于ABAQUS的中央电气接线盒温度场分析[J].郑州大学学报(工学版),2020,41(04):68.[doi:10.13705/j.issn.1671-6833.2020.04.001]
 HE Zhanshu,CHEN Lei,WANG Wujun,et al.Analysis of Temperature Field for Central Electric Junction Box Based on ABAQUS[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):68.[doi:10.13705/j.issn.1671-6833.2020.04.001]
[8]徐刚,梁帅,刘武发,等.流动聚焦型微流控芯片微通道结构优化[J].郑州大学学报(工学版),2020,41(04):87.[doi:10.13705/j.issn.1671-6833.2020.04.003]
 XU Gang,LIANG Shuai,LIU Wufa,et al.Optimization of Micro-channel Structure of Flow Focusing Microfluidic Chip[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):87.[doi:10.13705/j.issn.1671-6833.2020.04.003]
[9]邹卫华,刘鹏磊,刘秋节,等.磁性活性炭对水体中磺胺嘧啶钠的吸附机理研究[J].郑州大学学报(工学版),2020,41(04):92.[doi:10.13705/j.issn.1671-6833.2020.01.008]
 ZOU Weihua,LIU Penglei,LIU Qiujie,et al.Investigation into the Adsorption Mechanism of Sulfadiazine Sodium in Aqueous Solution Using Magnetic Biochar[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):92.[doi:10.13705/j.issn.1671-6833.2020.01.008]
[10]严亚丹,李杨,仝佩.基于修正通行能力的出入口位置优化方法[J].郑州大学学报(工学版),2020,41(04):7.[doi:10.13705/j.issn.1671-6833.2020.01.009]
 YAN Yadan,LI Yang,TONG Pei.Optimization Method of Road Access Location Based on Modified Capacity[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):7.[doi:10.13705/j.issn.1671-6833.2020.01.009]

更新日期/Last Update: 2023-08-02