[1]王志玲,李明,李民生.人工挖孔扩底桩的承载力试验研究[J].郑州大学学报(工学版),1998,19(03):59-62.
　Wang Zhiling,Li Ming,Li Minsheng.Research on the bearing capacity of artificial digging of the bottom pile[J].Journal of Zhengzhou University (Engineering Science),1998,19(03):59-62.
点击复制

人工挖孔扩底桩的承载力试验研究()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
19
期数:
1998年03期
页码:
59-62
栏目:
出版日期:
1998-12-01

文章信息/Info

Title:
Research on the bearing capacity of artificial digging of the bottom pile
作者:
王志玲; 李明; 李民生
郑州工业大学土建系,河南省教委
Author(s):
Wang Zhiling;  Li Ming;  Li Minsheng
Zhengzhou University of Technology, Department of Civil Construction, Henan Provincial Education Commission
关键词:
扩底桩; 极限承载力; 桩端阻力
Keywords:
Expand the bottom pile;  extreme carrier capacity;  pile resistance
文献标志码:
A
摘要:
介绍了某工程中人工挖孔扩底桩的竖向静载荷试验情况，揭示了其承载力严重不足的原因。试验结果表明，扩底桩的承载力不仅与桩端尺寸有关，而且还与桩端土的状态有关，土质越软，极限承载力越小。因此，在较软弱的地基上，不宜采用扩大桩端尺寸的办法来提高承载力。
Abstract:
The experimental situation of the vertical static load of the artificial digging piles in a certain project was introduced, and the cause of its serious lack of bearing capacity was revealed. The test results show that the bearing capacity of the expansion of the bottom pile is not only related to the size of the pile end, but also related to the state of the pile ends. The soft the soil, the smaller the limit bearing capacity. Therefore, in the weaker foundation, it is not advisable to use the size of the pile end to increase the bearing capacity.

相似文献/References:

[1]马强,朱健,邢文文,等.具有硬壳层的涵洞地基极限承载力分析[J].郑州大学学报(工学版),2016,37(01):70.[doi:10.3969/j.issn.1671-6833.201504039]
　Ma Qiang,Zhu Jian,Xing Wenwen,et al.Analysis of Ultimate Bearing Capacity of Culvert Foundation with Crust Layer[J].Journal of Zhengzhou University (Engineering Science),2016,37(03):70.[doi:10.3969/j.issn.1671-6833.201504039]
[2]蒋洋,郭建坤,王晓谋,等.基于双侧非对称破坏模式的临坡地基极限承载力分析[J].郑州大学学报(工学版),2019,40(03):85.[doi:10.13705/j.issn.1671-6833.2018.06.016]
　Jiang Yang,Guo Jiankun,Wang Xiaomou,et al.Analysis on Ultimate Bearing Capacity of Ground Foundation Adjacent to Slope Based on Bilateral Asymmetry Failure Mode[J].Journal of Zhengzhou University (Engineering Science),2019,40(03):85.[doi:10.13705/j.issn.1671-6833.2018.06.016]
[3]张哲,史锦,李国强,等.带翼缘板嵌入式连接件抗剪承载力试验研究[J].郑州大学学报(工学版),2020,41(02):86.[doi:10.13705/j.issn.1671-6833.2020.03.008]
　Zhe Zhang,History Li Guoqiang,Soup,et al.Experimental Study on Shear Bearing Capacity of Embedded Connector with Flange Plate[J].Journal of Zhengzhou University (Engineering Science),2020,41(03):86.[doi:10.13705/j.issn.1671-6833.2020.03.008]

更新日期/Last Update: 1900-01-01