[1]李廷占,张明成,王东升..15千瓦圆筒形推拉式磁驱动器的优化设计[J].郑州大学学报(工学版),2001,22(03):53-55.[doi:10.3969/j.issn.1671-6833.2001.03.016]
　Li Tingzhan,ZHANG Mingcheng,Wang Dongsheng.Optimized design of 15 kW cylindrical push-pull magnetic drives[J].Journal of Zhengzhou University (Engineering Science),2001,22(03):53-55.[doi:10.3969/j.issn.1671-6833.2001.03.016]
点击复制

15千瓦圆筒形推拉式磁驱动器的优化设计()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
22
期数:
2001年03期
页码:
53-55
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Optimized design of 15 kW cylindrical push-pull magnetic drives
作者:
李廷占; 张明成; 王东升.
郑州大学工程力学系,, 郑州大学机械工程学院,
Author(s):
Li Tingzhan; ZHANG Mingcheng; Wang Dongsheng
关键词:
磁驱动偶合器;  优化设计;  选择
Keywords:
DOI:
10.3969/j.issn.1671-6833.2001.03.016
文献标志码:
A
摘要:
磁驱动偶合器是一种非接触型动力传动装置.在推导出磁驱动偶合器的磁力矩公式的基础上,对磁偶合器的各主要部分进行各种因素分析比较,提出优化设计思路,解决了磁体长和气隙长之比问题、长径比问题、最大磁力矩和最短磁路问题、相对位移角和磁极张角的比率问题.
Abstract:
The magnetic drive coupling is a non-contact type power transmission device. On the basis of deriving the magnetic torque formula of the magnetic drive coupling, various factors are analyzed and compared in the main parts of the magnetic coupling, and the optimization design idea is proposed, which solves the problem of the ratio of magnet length to air gap length, the problem of length-diameter ratio, the problem of maximum magnetic moment and shortest magnetic circuit, and the ratio of relative displacement angle and pole opening angle.

相似文献/References:

[1]王东炜,张奇伟,王用中..基于模态分析的鄄城黄河公路大桥优化设计[J].郑州大学学报(工学版),2010,31(06):1.[doi:10.3969/j.issn.1671-6833.2010.06.001]
[2]赵艳敏,霍达..基于遗传模拟退火算法的钢桁架结构优化设计[J].郑州大学学报(工学版),2011,32(06):54.
　ZHAO Yan-min,HUO Da.Optimal Design of Steel Truss Structure Based on Genetic Simulated Annealing Algorithm[J].Journal of Zhengzhou University (Engineering Science),2011,32(03):54.
[3]张三川,张金瑞,李霞..矿用自卸车前推连杆组合式举升机构的优化设计[J].郑州大学学报(工学版),2013,34(02):125.[doi:10.3969/j.issn.1671-6833.2013.00.31]
　ZHANG San-chuan,ZHANG Jin-rui,LI Xia.Optimal Design of the Front Push Rod AssemblyLifting Mechanism on Mining Dump Truck[J].Journal of Zhengzhou University (Engineering Science),2013,34(03):125.[doi:10.3969/j.issn.1671-6833.2013.00.31]
[4]梅钢,徐能雄..深基坑桩锚支护结构优化设计方法及系统研制[J].郑州大学学报(工学版),2008,29(04):124.[doi:10.3969/j.issn.1671-6833.2008.04.029]
　Mei Gang,Xu Nengxiong.Optimization design method and system development of anchor support structure of deep foundation pit pile[J].Journal of Zhengzhou University (Engineering Science),2008,29(03):124.[doi:10.3969/j.issn.1671-6833.2008.04.029]
[5]刘海军,孙尚,许碧娟..双层Kiewitt型球面网壳优化设计[J].郑州大学学报(工学版),2007,28(01):91.[doi:10.3969/j.issn.1671-6833.2007.01.023]
　Liu Haijun,SUN Shang,Xu Bijuan.Optimized design of double-layer Kiewitt spherical mesh shell[J].Journal of Zhengzhou University (Engineering Science),2007,28(03):91.[doi:10.3969/j.issn.1671-6833.2007.01.023]
[6]郭院成,王立明,曾力..基于位移控制的单支点桩锚支护结构的优化设计[J].郑州大学学报(工学版),2004,25(04):4.[doi:10.3969/j.issn.1671-6833.2004.04.002]
　GUO Yuancheng,Wang Liming,Zeng Li.Optimal design of single-fulcrum pile anchor support structure based on displacement control[J].Journal of Zhengzhou University (Engineering Science),2004,25(03):4.[doi:10.3969/j.issn.1671-6833.2004.04.002]
[7]周荣敏,雷延锋..基于遗传算法的雨水管道系统优化设计[J].郑州大学学报(工学版),2003,24(04):59.[doi:10.3969/j.issn.1671-6833.2003.04.014]
　ZHOU Rongmin,Lei Yanfeng.Optimal design of rainwater pipe system based on genetic algorithm[J].Journal of Zhengzhou University (Engineering Science),2003,24(03):59.[doi:10.3969/j.issn.1671-6833.2003.04.014]
[8]李莉,祝芳..扩建给水管网的直接优化计算方法[J].郑州大学学报(工学版),2002,23(04):76.[doi:10.3969/j.issn.1671-6833.2002.04.021]
　LI Li,Zhu Fang.Direct optimization calculation method for expanding the water supply network[J].Journal of Zhengzhou University (Engineering Science),2002,23(03):76.[doi:10.3969/j.issn.1671-6833.2002.04.021]
[9]陈江义,阳培,苏智剑..均匀设计技术在机械设计中的应用[J].郑州大学学报(工学版),2001,22(01):84.[doi:10.3969/j.issn.1671-6833.2001.01.024]
　CHEN Jiangyi,Yangpei,Su Zhijian.Application of uniform design technology in mechanical design[J].Journal of Zhengzhou University (Engineering Science),2001,22(03):84.[doi:10.3969/j.issn.1671-6833.2001.01.024]
[10]鹿跃丽,陈江义,张明成,等.牛头刨床六杆机构的优化设计[J].郑州大学学报(工学版),1999,20(03):39.[doi:10.3969/j.issn.1671-6833.1999.03.013]
　Lu Yueli,CHEN Jiangyi,ZHANG Mingcheng,et al.Optimized design of the six-bar mechanism of the bull head planer[J].Journal of Zhengzhou University (Engineering Science),1999,20(03):39.[doi:10.3969/j.issn.1671-6833.1999.03.013]

更新日期/Last Update: 1900-01-01