[1]申长雨,郭恒亚,赵振峰,等.模腔表面平均温度边界对注塑仿真的影响[J].郑州大学学报(工学版),2005,26(01):9-12.[doi:10.3969/j.issn.1671-6833.2005.01.003]
 Shen Changyu,GUO Hengya,ZHAO Zhenfeng,et al.Effect of cavity surface average temperature boundary on injection molding simulation[J].Journal of Zhengzhou University (Engineering Science),2005,26(01):9-12.[doi:10.3969/j.issn.1671-6833.2005.01.003]
点击复制

模腔表面平均温度边界对注塑仿真的影响()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
26
期数:
2005年01期
页码:
9-12
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Effect of cavity surface average temperature boundary on injection molding simulation
作者:
申长雨郭恒亚赵振峰等.
郑州大学橡塑模具国家工程研究中心,河南,郑州,450002, 郑州大学橡塑模具国家工程研究中心,河南,郑州,450002, 郑州大学橡塑模具国家工程研究中心,河南,郑州,450002, 郑州大学橡塑模具国家工程研究中心,河南,郑州,450002
Author(s):
Shen Changyu; GUO Hengya; ZHAO Zhenfeng; etc
关键词:
注塑仿真 温度场 有限元方法 模腔表面温度
Keywords:
DOI:
10.3969/j.issn.1671-6833.2005.01.003
文献标志码:
A
摘要:
应用一维有限元方法进行注塑成型过程中温度场的计算机模拟,讨论采用模腔表面平均温度边界条件对传热分析造成的误差.结果显示,当对模具的精度要求不高时,误差是可以接受的;但对于精密注塑件,或者制件很薄,这种误差则会对数值分析产生影响.针对这种情况,根据实际的瞬态温度分布,提出一种用平均温度构造近似的瞬态温度场方法,以提高注塑数值模拟的精度.
Abstract:
The one-dimensional finite element method was used to simulate the temperature field in the injection molding process, and the error caused by the average temperature boundary condition of the mold cavity surface was discussed for the heat transfer analysis. The results show that when the accuracy of the mold is not high, the error is acceptable; However, for precision injection molded parts, or thin parts, this error can have an impact on the numerical analysis. In view of this situation, according to the actual transient temperature distribution, a transient temperature field method with average temperature construction is proposed to improve the accuracy of numerical simulation of injection molding.

相似文献/References:

[1]戴逸飞,杨 平,王 宁,等.交叠车站下穿段MJS加固温度场变化规律研究[J].郑州大学学报(工学版),2023,44(01):103.[doi:10.13705/j.issn.1671-6833.2022.04.002]
 DAI Yifei,YANG Ping,WANG Ning,et al.Study on Temperature Field Variation Law of MJS Reinforcement for Underpass Section of Overlapping Station[J].Journal of Zhengzhou University (Engineering Science),2023,44(01):103.[doi:10.13705/j.issn.1671-6833.2022.04.002]
[2]夏江涛,杨平..盾构出洞水平冻结加固杯形冻土壁温度场监测分析[J].郑州大学学报(工学版),2010,31(02):30.
 XIA Jiangtao,YANG Ping.Survey Analysis of Temperature Field in Cup—-shaped Frozen Soil Wallof Horizontal Freezing Reinforcement for Shield Tunnelling[J].Journal of Zhengzhou University (Engineering Science),2010,31(01):30.
[3]张岗,贺拴海..非稳对流模式下混凝土箱梁内生热场与计算方法[J].郑州大学学报(工学版),2010,31(04):11.[doi:10.3969/j.issn.1671-6833.2010.04.003]
[4]任翔,何青,佟阳,等.混凝土桥塔温度场和空间应力场分析[J].郑州大学学报(工学版),2011,32(02):62.[doi:10.3969/j.issn.1671-6833.2011.02.016]
[5]陈成,杨平,张婷..高承压富含水层人工强制解冻温度场数值分析[J].郑州大学学报(工学版),2012,33(02):81.[doi:10.3969/j.issn.1671-6833.2012.02.020]
 CHEN Cheng,YANG Ping,ZHANG Ting.Numerical Analysis of Artificial Thawing TemperatureField in High-confined Aquifer Reinforcement[J].Journal of Zhengzhou University (Engineering Science),2012,33(01):81.[doi:10.3969/j.issn.1671-6833.2012.02.020]
[6]张银霞,乔向南,王栋,等.CO2气体保护焊温度场的三维数值模拟与分析[J].郑州大学学报(工学版),2012,33(04):41.[doi:10.3969/j.issn.1671-6833.2012.04.010]
 ZHANG Yinxia,Qiao Xiangnan,WANG Dong,et al.Three-dimensional Numerical Simulation and Research of CO2 Arc Welding Temperature Field[J].Journal of Zhengzhou University (Engineering Science),2012,33(01):41.[doi:10.3969/j.issn.1671-6833.2012.04.010]
[7]夏茂辉,赵玉凤,吕鹏,等.改进型无网格迦辽金法在稳定热传导中的应用[J].郑州大学学报(工学版),2012,33(06):71.[doi:10.3969/j.issn.1671-6833.2012.06.017]
 XlA Maohui,ZHA0 Yufeng,LV Peng,et al.Application of Improved Element-free Galerkin Method in Stable Heat Conduction[J].Journal of Zhengzhou University (Engineering Science),2012,33(01):71.[doi:10.3969/j.issn.1671-6833.2012.06.017]
[8]王为术,李帅帅,周俊杰,等.350MW超临界锅炉螺旋水冷壁壁温特性研究[J].郑州大学学报(工学版),2013,34(03):50.[doi:10.3969/j.issn.1671-6833.2013.03.013]
 WANG Wei-shu,LI Shuai-shuai,ZHOU Jun-jie,et al.The Temperature Characteristics Study of Spiral Water-wallin 350 Mw Supercritical Pressure Boilers[J].Journal of Zhengzhou University (Engineering Science),2013,34(01):50.[doi:10.3969/j.issn.1671-6833.2013.03.013]
[9]李金海,熊滨生..微水节能热风阀阀板的模拟分析[J].郑州大学学报(工学版),2008,29(03):66.[doi:10.3969/j.issn.1671-6833.2008.03.017]
 Li Jinhai,Xiong Binsheng.Simulation analysis of micro-water energy-saving hot air valve valve plate[J].Journal of Zhengzhou University (Engineering Science),2008,29(01):66.[doi:10.3969/j.issn.1671-6833.2008.03.017]
[10]夏毅敏,暨智勇,姚萍屏..高速动车组制动盘瞬态温度场及热应力场分析[J].郑州大学学报(工学版),2009,30(03):75.
 XIA Yimin,JI Zhiyong,YAO Pingping.Analysis of Transient Temperature Field and Thermal Stress Field of Brake Disc of High-speed EMU[J].Journal of Zhengzhou University (Engineering Science),2009,30(01):75.

更新日期/Last Update: 1900-01-01