[1]许伟长,戴品强..标距尺寸对纳米镍拉伸性能的影响[J].郑州大学学报(工学版),2009,30(01):48-52.
 XU Weichang,DAI Pinqiang.Effect of Gauge Size on Tensile Properties of Nano-nickel[J].Journal of Zhengzhou University (Engineering Science),2009,30(01):48-52.
点击复制

标距尺寸对纳米镍拉伸性能的影响()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
30
期数:
2009年01期
页码:
48-52
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Effect of Gauge Size on Tensile Properties of Nano-nickel
作者:
许伟长戴品强.
福州大学,材料学院,福建,福州,350108, 福州大学,材料学院,福建,福州,350108
Author(s):
XU Weichang; DAI Pinqiang
College of Materials Science and Engineering,Fuzhou University,Fuzhou 350108。China
关键词:
纳米镍 力学性能 剪切带 电沉积 晶粒尺寸分布
Keywords:
nano-nickel mechanical properties shear tape electrodeposition Grain size distribution
文献标志码:
A
摘要:
采用直流电沉积制备了平均晶粒尺寸为27.2 nm且宽晶粒尺寸为5~120 nm的纳米镍.通过室温单向拉伸实验研究了标距尺寸对纳米镍力学性能的影响.研究发现,纳米镍的屈服强度随标距长宽比(r)的增加而增加,弹性、塑性应变均随r的增加而减小,标距尺寸对拉伸中的剪切断裂行为没有影响;通过TEM对拉伸断口、剪切带组织的观察,发现纳米镍变形后平均晶粒尺寸较镀态下具有明显粗化,剪切带是由变形过程中首先粗化的晶粒区发生进一步的集中塑性变形引起的,剪切带上晶粒沿特定方向被拉长,平直的晶界对应于SEM观察到的平行线.
Abstract:
Nano-nickel with an average grain size of 27.2 nm and a wide grain size of 5~120 nm was prepared by direct current deposition. The effect of gauge size on the mechanical properties of nano-nickel was studied by unidirectional tensile experiment at room temperature. It is found that the yield strength of nano-nickel increases with the increase of the gauge aspect ratio (r), the elastic and plastic strain decrease with the increase of r, and the gauge size has no effect on the shear fracture behavior in tension. Through TEM’s observation of the structure of tensile fracture and shear band, it is found that the average grain size after the deformation of nano-nickel is significantly coarsed compared with the plating state, and the shear band is caused by further concentrated plastic deformation of the grain area that is first coarsed during the deformation process, and the grain on the shear band is elongated in a specific direction, and the straight grain boundary corresponds to the parallel line observed by SEM.

相似文献/References:

[1]张琦,黄故..紫外线对玻璃纤维增强复合材料的老化研究[J].郑州大学学报(工学版),2010,31(04):101.[doi:10.3969/j.issn.1671-6833.2010.04.025]
[2]张鹏,刘晨辉,李清富..聚丙烯纤维水泥稳定碎石力学性能试验研究[J].郑州大学学报(工学版),2010,31(05):44.[doi:10.3969/j.issn.1671-6833.2010.05.011]
[3]朱小青,陈淮,于品德..支座脱空对西张村大桥受力性能的影响[J].郑州大学学报(工学版),2010,31(05):70.[doi:10.3969/j.issn.1671-6833.2010.05.017]
[4]王艳,谷定宇,陈淮..连续多跨矮塔斜拉桥力学性能分析[J].郑州大学学报(工学版),2012,33(01):32.[doi:10.3969/j.issn.1671-6833.2012.01.008]
 WANG Yan,GU Dingyu,CHEN Huai.Mechanics Properties Analysis for Continuous Multi-spanLow Pylon Cable-stayed Bridge[J].Journal of Zhengzhou University (Engineering Science),2012,33(01):32.[doi:10.3969/j.issn.1671-6833.2012.01.008]
[5]王占锋,王社良,翁光远..不同粗骨料取代率再生混凝土力学性能试验研究[J].郑州大学学报(工学版),2012,33(04):32.[doi:10.3969/j.issn.1671-6833.2012.04.008]
 WANG Zhanfeng,WANG Sheliang,WENG Guangyuan.Experimental Study on Mechanical Properties of Concrete Prepared withDifferent Recycled Coarse Aggregates Replacement Rate[J].Journal of Zhengzhou University (Engineering Science),2012,33(01):32.[doi:10.3969/j.issn.1671-6833.2012.04.008]
[6]蒋登高,彭冲,彭闯,等.PS/K树脂合金的制备及表征[J].郑州大学学报(工学版),2013,34(03):42.[doi:10.3969/j.issn.1671-6833.2013.03.011]
 JIANGDengga0,PENG Chon9,PENGChuang,et al.PreparationandCharacterization ofthe K-Resin/PS Alloy[J].Journal of Zhengzhou University (Engineering Science),2013,34(01):42.[doi:10.3969/j.issn.1671-6833.2013.03.011]
[7]王振军,高杰,魏永锋,等.阳离子乳化沥青对硅酸盐水泥砂浆力学性能影响分析[J].郑州大学学报(工学版),2013,34(03):81.[doi:10.3969/j.issn.1671-6833.2013.03.020]
 WANG Zhen-jun,GAO Jie,AI Tao,et al.Mechanism and Influence of Asphalt Emulsion on Mechanical Performance of Cement Mortar[J].Journal of Zhengzhou University (Engineering Science),2013,34(01):81.[doi:10.3969/j.issn.1671-6833.2013.03.020]
[8]王东炜,李芳,闫磊..自调式升降井盖与传统井盖力学性能对比分析[J].郑州大学学报(工学版),2013,34(04):1.[doi:10.3969/j.issn.1671-6833.2013.04.001]
 WANG Dong-wei,LI Fang,YAN Lei.Comparative Analysis of Mechanical Properties of the Self-adjustable Lifting Manhole Cover and the Rraditional One[J].Journal of Zhengzhou University (Engineering Science),2013,34(01):1.[doi:10.3969/j.issn.1671-6833.2013.04.001]
[9]周庆华,沙爱民,杨琴..高模量沥青混凝土力学性能试验研究[J].郑州大学学报(工学版),2008,29(01):128.
 ZHOU Qinghua,Sha Aimin,Yang Qin.Experimental study on mechanical properties of high-modulus asphalt concrete[J].Journal of Zhengzhou University (Engineering Science),2008,29(01):128.
[10]孙晓峰,马世宁,朱乃姝,等.纳米微波吸收剂对改性环氧胶粘剂微波固化性能的影响[J].郑州大学学报(工学版),2008,29(04):14.[doi:10.3969/j.issn.1671-6833.2008.04.004]
 SUN Xiaofeng,Ma Shining,Zhu Naishu,et al.Effect of nano-microwave absorber on microwave curing performance of modified epoxy adhesive[J].Journal of Zhengzhou University (Engineering Science),2008,29(01):14.[doi:10.3969/j.issn.1671-6833.2008.04.004]

更新日期/Last Update: 1900-01-01