相似文献/References:
[1]周俊杰,王璞,周金方.基于ANSYS CFX的汽轮机叶片气动性能优化模拟研究[J].郑州大学学报(工学版),2017,38(04):1.[doi:10.13705/j.issn.1671-6833.2017.01.008]
Zhou Junjie,Wang Pu,Zhou Jinfang.Study on Numerical Simulation of The Steam Turbine Blade Aerodynamic steam turbine increases.Performance Optimization Based on ANSYS CFX[J].Journal of Zhengzhou University (Engineering Science),2017,38(05):1.[doi:10.13705/j.issn.1671-6833.2017.01.008]
[2]周俊杰,王梅玲,郭朋飞,等.汽轮机叶型的三维数值模拟及优化[J].郑州大学学报(工学版),2015,36(01):49.[doi:10.3969/ j. issn.1671 -6833.2015.01. 012]
ZHOU Jun-jie,WANG Mei-ling,GUO Peng-fei,et al.Three-dimensional Numerical Simulation and Optimization of Steam Turbine Blade[J].Journal of Zhengzhou University (Engineering Science),2015,36(05):49.[doi:10.3969/ j. issn.1671 -6833.2015.01. 012]
[3]时刚,田新涛.工程卡车行驶引发地面振动特性研究[J].郑州大学学报(工学版),2020,41(05):76.[doi:10.13705/j.issn.1671-6833.2020.03.017]
SHI Gang,TIAN Xintao.Research on Ground Vibration Characteristics Caused by Engineering Truck Driving[J].Journal of Zhengzhou University (Engineering Science),2020,41(05):76.[doi:10.13705/j.issn.1671-6833.2020.03.017]
[4]戴逸飞,杨 平,王 宁,等.交叠车站下穿段MJS加固温度场变化规律研究[J].郑州大学学报(工学版),2023,44(01):103.[doi:10.13705/j.issn.1671-6833.2022.04.002]
DAI Yifei,YANG Ping,WANG Ning,et al.Study on Temperature Field Variation Law of MJS Reinforcement for Underpass Section of Overlapping Station[J].Journal of Zhengzhou University (Engineering Science),2023,44(05):103.[doi:10.13705/j.issn.1671-6833.2022.04.002]
[5]王定标,万方方,周俊杰..蒸发式冷凝器异型扁管性能分析及数值模拟[J].郑州大学学报(工学版),2010,31(02):67.
WANG Dingbiao,WANG Fangfang,Zhou Junjie.Performance Analysis and Numerical Simulation of EvaporativeCondenser with Special—-shaped Flat Tube[J].Journal of Zhengzhou University (Engineering Science),2010,31(05):67.
[6]董其伍,王烨,刘敏珊..流动冲击角对流体绕流管束换热的影响[J].郑州大学学报(工学版),2010,31(02):0.
DONG Qiwu,WANG Ye,LIU Minshan.Influence of Flowing Impact Angle Heat Transfer in Fluid Flowing Across Tube Bundles[J].Journal of Zhengzhou University (Engineering Science),2010,31(05):0.
[7]王丹,董其伍,刘敏珊..管壳式换热器模块综合模拟方法研究[J].郑州大学学报(工学版),2010,31(03):20.
WANG Dan,DONG Qiwu,LIU Minshan.Study on Module Synthesis Simulation Method forShell-and-Tube Heat Exchanger[J].Journal of Zhengzhou University (Engineering Science),2010,31(05):20.
[8]李成,马志垒,王永涛..冲击荷载下防弹钢板三维损伤分析[J].郑州大学学报(工学版),2010,31(04):85.[doi:10.3969/j.issn.1671-6833.2010.04.021]
[9]张兆宁,贺拴海,赵煜..基于应力控制箱梁截面设计数值模拟分析[J].郑州大学学报(工学版),2010,31(06):65.[doi:10.3969/j.issn.1671-6833.2010.06.016]
[10]汪磊,李涛..海底隧道穿越断层破碎带预注浆加固稳定性分析[J].郑州大学学报(工学版),2010,31(06):73.[doi:10.3969/j.issn.1671-6833.2010.06.018]