[1]周俊杰,王梅玲,郭朋飞,等.汽轮机叶型的三维数值模拟及优化[J].郑州大学学报(工学版),2015,36(01):49-53.[doi:10.3969/ j. issn.1671 -6833.2015.01. 012]
　ZHOU Jun-jie,WANG Mei-ling,GUO Peng-fei,et al.Three-dimensional Numerical Simulation and Optimization of Steam Turbine Blade[J].Journal of Zhengzhou University (Engineering Science),2015,36(01):49-53.[doi:10.3969/ j. issn.1671 -6833.2015.01. 012]
点击复制

汽轮机叶型的三维数值模拟及优化()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
36
期数:
2015年01期
页码:
49-53
栏目:
出版日期:
2015-01-10

文章信息/Info

Title:
Three-dimensional Numerical Simulation and Optimization of Steam Turbine Blade
作者:
周俊杰; 王梅玲; 郭朋飞; 王定标
郑州大学化工与能源学院,河南郑州450001
Author(s):
ZHOU Jun-jie; WANG Mei-ling; GUO Peng-fei; WANG Ding-biao
School of Chemical Engineering & Energy ,Zhengzhou University ,Zhengzhou 450001，China
关键词:
汽轮机; 叶片; 气动性能; 数值模拟
Keywords:
steam turbine;  blade;  aerodynamic performance;  numerical simulation
分类号:
TK26
DOI:
10.3969/ j. issn.1671 -6833.2015.01. 012
文献标志码:
A
摘要:
以25MW凝气式汽轮机的某级叶片为研究对象,利用ANSYS Workbench平台中的旋转机械分析系统对该级叶片进行了静、动联合三维数值模拟优化.结果表明,优化后叶片压力系数分布较好,降低了叶片表面压差分布,有效控制径向二次流损失;总压损失系数有所减小,平均总压损失系数降低1 % ;等嫡效率由原来的92.099%提高至93.157% .优化后的叶型明显提高了气动性能,降低叶型能量损失，增加了汽轮机效率.
Abstract:
The three-dimensional numerical simulation and optimization of the last stage of a 25 MW condensa-ble steam turbine are conducted by using ANSYS Workbench,a platform of analysis system specially for therotating machinery. The results show that the modified blade has a better pressure coefficient distribution,re-duces the differential pressure distribution of blade surface,effectively controls the radial secondary flow los-ses.Total pressure loss coefficient is reduced,and the average total pressure loss coefficient is reduced by 1% . Isentropic efficiency increases from 92. 099 % to 93.157 % . After optimization,the aerodynamic per-formance of the blade increases obviously,the energy loss in the blade is reduced and the efficiency of steamturbine increases.

相似文献/References:

[1]王定标,雷风林,向飒,等.汽轮机末级变工况三维数值模拟与叶型改进设计[J].郑州大学学报(工学版),2010,31(05):1.[doi:10.3969/j.issn.1671-6833.2010.05.001]
[2]许德刚,翟萍,秦力一..汽轮机的转子损伤与优化启动[J].郑州大学学报(工学版),2002,23(04):1.[doi:10.3969/j.issn.1671-6833.2002.04.001]
　Xu Degang,Zhai Ping,Qin Liyi.Rotor damage and optimized start of steam turbines[J].Journal of Zhengzhou University (Engineering Science),2002,23(01):1.[doi:10.3969/j.issn.1671-6833.2002.04.001]
[3]陈静波.叶片失调阶次及离心力效应对叶栅颤振边界的影响[J].郑州大学学报(工学版),1990,11(03):107.
　Chen Jingbo,The impact of leaves of leaves and centrifugal effects on the border of the leaves of the leaves of the leaves[J].Journal of Zhengzhou University (Engineering Science),1990,11(01):107.
[4]周俊杰,王璞,周金方.基于ANSYS CFX的汽轮机叶片气动性能优化模拟研究[J].郑州大学学报(工学版),2017,38(04):1.[doi:10.13705/j.issn.1671-6833.2017.01.008]
　Zhou Junjie,Wang Pu,Zhou Jinfang.Study on Numerical Simulation of The Steam Turbine Blade Aerodynamic steam turbine increases.Performance Optimization Based on ANSYS CFX[J].Journal of Zhengzhou University (Engineering Science),2017,38(01):1.[doi:10.13705/j.issn.1671-6833.2017.01.008]

更新日期/Last Update: