[1]王晓光谢钧张晓.六环冗余轴向磁力轴承的热性能研究[J].郑州大学学报(工学版),2015,36(03):34-38.[doi:10.3969/ j.issn.1671 -6833.2015.03.008]
 WANG Xiao-guang,XIE Jun,ZHANG Xiao,et al.Research on Thermal Characteristics of Six-ring Redundant Axial Magnetic Bearing[J].Journal of Zhengzhou University (Engineering Science),2015,36(03):34-38.[doi:10.3969/ j.issn.1671 -6833.2015.03.008]
点击复制

六环冗余轴向磁力轴承的热性能研究()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
36
期数:
2015年03期
页码:
34-38
栏目:
出版日期:
2015-06-30

文章信息/Info

Title:
Research on Thermal Characteristics of Six-ring Redundant Axial Magnetic Bearing
作者:
王晓光1谢钧2张晓3
武汉理工大学机电工程学院,湖北武汉430070
Author(s):
WANG Xiao-guangXIE JunZHANG XiaoLIU QianFU Jing
School of Mechanical and Electrical Engineering,Wuhan University of ’Technology,Wuhan 430070,China
关键词:
轴向磁力轴承冗余温度场
Keywords:
axial magnetic bearing redundant temperature field
分类号:
TH133.3
DOI:
10.3969/ j.issn.1671 -6833.2015.03.008
文献标志码:
A
摘要:
利用ANSYS Workbench对六环冗余轴向磁力轴承的温度场进行仿真计算,探讨了导致六环冗余轴向磁力轴承温升的原因,分析了磁路面积、磁环侧壁、转子转速等参数对六环冗余轴向磁力轴承温升的影响,给出了六环冗余轴向磁力轴承的结构设计和温升计算方法.研究表明:六环冗余轴向磁力轴承的结构形式对转子的温升影响较大,磁路设计时应该避免导致转子旋转时的反复磁化;失效重构对六环冗余轴向磁力轴承的温升影响较小,可以忽略其影响;六环冗余轴向磁力轴承较原有的两环冗余轴向磁力轴承具有更高的可靠性、力学特性以及较好的热特性.
Abstract:
In this paper,the temperature field of six-ring redundant axial magnetic bearing is simulated andcalculated by ANSYS Workbench and the reasons that result in the temperature rise of six-ring redundant axialmagnetic bearing are discussed. What ’s more,the influence of some parameters such as the magnetic circuitarea,the side wall of magnetic circular,rotating speed on six-ring redundant axial magnetic bearing are ana-lyzed and the structure design and calculation methods of temperature rise are put forward in this paper. Theresults show that,the structure of six-ring redundant axial magnetic bearing has great influence on the temper-ature rise of rotor. When the magnetic circuit is designed,the magnetization of rotor should be avoided. Thereconstruction of failure has small influence on the temperature rise of rotor,which can be ignored. Comparedwith the two-ring redundant axial magnetic bearing,the six-ring redundant axial magnetic bearing has higherreliability,mechanical property and preferable thermal characteristics.

相似文献/References:

[1]刘家学,李文华,朱铁稳.飞机元器件可靠性的优化模型[J].郑州大学学报(工学版),1998,19(02):115.
 [J].Journal of Zhengzhou University (Engineering Science),1998,19(03):115.
[2]王文义.对Runge—Kutta模型传统应用方法的改进及计算机验证[J].郑州大学学报(工学版),1996,17(04):80.
 Wang Wenyi.Improvement of the traditional application method of RUNGE -Kutta model and computer verification[J].Journal of Zhengzhou University (Engineering Science),1996,17(03):80.

更新日期/Last Update: