[1]车玉思,王成铎,孙玉福,等.大型竖式还原罐壁面温度分布特性研究[J].郑州大学学报(工学版),2018,39(03):87-92.[doi:10.13705/j.issn.1671-6833.2018.03.005]
　Che Yusi,Wang Chengduo,Sun Yufu,et al.Research of Wall Temperature Distribution of Large Vertical Reduction Pot[J].Journal of Zhengzhou University (Engineering Science),2018,39(03):87-92.[doi:10.13705/j.issn.1671-6833.2018.03.005]
点击复制

大型竖式还原罐壁面温度分布特性研究()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
39卷
期数:
2018年03期
页码:
87-92
栏目:
出版日期:
2018-05-10

文章信息/Info

Title:
Research of Wall Temperature Distribution of Large Vertical Reduction Pot
作者:
车玉思; 王成铎; 孙玉福; 杨沛胥; 张少军
1.郑州大学河南省资源与材料工业技术研究院,河南郑州450001;2.郑州大学材料科学与工程学院,河南郑州450001;3.郑州大学材料科学与工程学院,河南郑州,450001
Author(s):
Che Yusi1; Wang Chengduo2; Sun Yufu2; Yang Peixu1; Zhang Shaojun1
1. Henan Institute of Resources and Materials Industry Technology, Zhengzhou University, Zhengzhou, Henan 450001; 2. School of Materials Science and Engineering, Zhengzhou University, Zhengzhou, Henan 450001; 3. School of Materials Science and Engineering, Zhengzhou University, Zhengzhou, Henan, 450001
关键词:
Keywords:
vertical reduction pot; heat transfer; temperature distribution; CFD
DOI:
10.13705/j.issn.1671-6833.2018.03.005
文献标志码:
A
摘要:
根据传热学理论提出一种计算方法，用来研究大型竖式还原罐轴向传热和温度分布特性.结果表明：在内外绝热段，还原罐壁温沿高度方向呈线性递减规律；在自然对流换热段，还原罐壁温沿高度方向呈非线性递减，温度下降速率逐渐减小，但在壁厚减小处，温度下降速率出现突变。通过与数值模拟计算机现场实测温度对比，进一步验证了该计算方法的正确性。根据还原罐温度分布特性曲线，可得到罐体关键部位的温度，为解决还原罐材质的选择、还原罐的设计、罐体连接处密封材料的选择等时机工程问题提供参考依据。.
Abstract:
According to the theory of heart transfer, a calculating method was presented for investigate the heat transfer and temperature distribution along the avial direction of large vertical reduction pot. The results showed that the well temperature of reduction pot decreased linearly with increase in altitude of the adiabatic section. In the heat transfer area, the wall temperature decreased in a nonlinear way with increase in altitude, the decreasing rate of which gradually declined, but the decreasing rate changeed abruptly in the place of the declining thickness. And teh method was further verified through comparative analyses of CFD and the field measured temperature. According to the reduction pot temperature distribution curve, the temperature of keypart of the pot could be collected. This could provide reference for practical engineering to solve the problem of the reduction pot material selection, reduction pot design, sealing material of pot connection selection. These results could have certain engineering application value.

相似文献/References:

[1]盛遵荣,薛冰,刘周明,等.颗粒直径与轴向分布对吸附热变换器传热传质的影响[J].郑州大学学报(工学版),2017,38(04):17.[doi:10.3969/j.issn.1671-6833.2017.01.011]
　Sheng Zunrong,Xue Bing,Liu Zhouming,et al.Effect of particle diameter and particle axial distribution on heat and mass transfer inside adsorption heat transformer[J].Journal of Zhengzhou University (Engineering Science),2017,38(03):17.[doi:10.3969/j.issn.1671-6833.2017.01.011]
[2]董其伍,刘敏珊,郭茶秀,等.纵流壳程换热器性能研究[J].郑州大学学报(工学版),1996,17(03):1.
　Dong Qifu,Liu Minshan,Guo Chaxiu,et al.Research on the Performance of Performance of the Poor Shell[J].Journal of Zhengzhou University (Engineering Science),1996,17(03):1.
[3]王艳民.螺旋回热器的传热、经济性能及其制造[J].郑州大学学报(工学版),1990,11(02):98.
　Wang Yanmin,The heat transfer, economic performance and manufacturing of the spiral heating device[J].Journal of Zhengzhou University (Engineering Science),1990,11(03):98.

更新日期/Last Update: 2018-05-03