[1]张猛,张玉莹,赵桂峰,等.考虑温度场的架空钢芯铝绞线线股应力研究[J].郑州大学学报(工学版),2018,39(04):7-12.[doi:1013705/j.issn.1671-68332018.01031]
 Zhang Meng,Zhang Yuying,Zhao Guifeng,et al.Study on Stress of Overhead Steel Core A luminum Wire Strand Considering the Effect of Temperature Field.[J].Journal of Zhengzhou University (Engineering Science),2018,39(04):7-12.[doi:1013705/j.issn.1671-68332018.01031]
点击复制

考虑温度场的架空钢芯铝绞线线股应力研究()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
39卷
期数:
2018年04期
页码:
7-12
栏目:
出版日期:
2018-07-22

文章信息/Info

Title:
Study on Stress of Overhead Steel Core A luminum Wire Strand Considering the Effect of Temperature Field.
作者:
张猛张玉莹赵桂峰肖宇
郑州大学 土木工程学院,河南 郑州,450001
Author(s):
Zhang Meng Zhang Yuying Zhao Guifeng Xiao Yu
School of Civil Engineering, Zhengzhou University, Zhengzhou, Henan 450001 
关键词:
Keywords:
DOI:
1013705/j.issn.1671-68332018.01031
文献标志码:
A
摘要:
准确了解钢芯铝绞线在温度场中各层线股的应力分布,可为架空导线的安全设计和疲劳分析提供理论依据。根据钢芯铝绞线材料性能和协同变形特点,采用理论分析和有限元模拟研究导线线股应力和温度之间的关系,分析了导线平均温度和径向温差对最外层铝股应力的影响。结果表明,不考虑径向温差时,铝股应力随温度的升高而减小,钢芯应力随着温度的升高而增大;考虑径向温差时,外层铝股的应力随着温差的增大而增大,内部铝股和钢芯的应力随着温差的增大而减小,温差达到20ºc时,外层铝股应力增加49%左右。
Abstract:
An accurate understanding of the stress distribution of each layer of ACSR in the temperature field can provide theoretical basis for the safety design and fatigue analysis of overhead conductors . Based on the properties of ACSR materials and its collaborative deformation characteristics, the relationship between stress and temperature of wire strands is studied by theoretical analysis and finite element simulation. And the effects of average temperature and radial temperature difference on the stress of outermost aluminum strands of aluminum strand decreased with the increase of temperature. While the stress of steel core increase with the increase of temperature; when the radial temperature difference was considered, the outer aluminum strand stress increased with the increase of temperature fifference, and steel core aluminum strand internal stress decreased with the increase of temperature difference. When the temperature reached 20ºc, the outer layer of aluminum stress increased about 49%.      

相似文献/References:

[1]李宇.大跨连续梁桥施工膺架的设计研究[J].郑州大学学报(工学版),2016,37(02):77.[doi:10.3969/j.issn.1671-6833.201505033]
 Li Yu.Research on Optimization Design for Constructive Rack of Long-span continuous beam bridge[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):77.[doi:10.3969/j.issn.1671-6833.201505033]
[2]闫安志,陶天增,张振华.端部质量对有无损伤悬臂梁的模态影响分析[J].郑州大学学报(工学版),2016,37(05):39.[doi:10.13705/j.issn.1671-6833.2016.05.008]
 Yan Anzhi,Tao Tianzeng,Zhang Zhenhua.The mode analysis of the cantilever beam with concentrated mass on its free end in the case of with and without damage[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):39.[doi:10.13705/j.issn.1671-6833.2016.05.008]
[3]朱强,杜鹏,王建军,等.特殊螺纹套管接头柱面/球面密封结构有限元分析[J].郑州大学学报(工学版),2016,37(05):82.[doi:10.13705/j.issn.1671-6833.2016.05.016]
 Zhu Qiang,Du Peng,Wang Jianjun,et al.Sealability Analysis of Premium Connection with Cylinder/Sphere Sealing Structure Based on FEM[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):82.[doi:10.13705/j.issn.1671-6833.2016.05.016]
[4]王衡,陈廷国.基于数值计算的矩形孔蜂窝梁应力分布规律研究[J].郑州大学学报(工学版),2016,37(06):58.[doi:10.13705/j.issn.1671-6833.2016.03.029]
 Wang Heng,Chen Tingguo.Research on the Stress Distribution of Rectangular Hole Castellated Beams based on Numerical Calculation[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):58.[doi:10.13705/j.issn.1671-6833.2016.03.029]
[5]李通、时强、王新武、叶重阳.耗能梁段腹板开孔对偏心支撑钢框架抗震性能影响[J].郑州大学学报(工学版),2021,42(02):38.[doi:10.13705/j.issn.1671-6833.2021.02.011]
 Li Tong,Shiqiang,Wang Xinwu,et al.Influence of Web Openings on Seismic Behavior of Eccentrically Braced Steel fr<x>ames[J].Journal of Zhengzhou University (Engineering Science),2021,42(04):38.[doi:10.13705/j.issn.1671-6833.2021.02.011]
[6]高丹盈,杨素娟,李占松,等.南水北调大沙河渠道排水非稳定渗流计算分析[J].郑州大学学报(工学版),2010,31(05):27.[doi:10.3969/j.issn.1671-6833.2010.05.007]
[7]申长雨,黄明,赵振峰,等.改进的Allman无零能模式平面三角形单元[J].郑州大学学报(工学版),2005,26(01):13.[doi:10.3969/j.issn.1671-6833.2005.01.004]
 Shen Changyu,HUANG Ming,ZHAO Zhenfeng,et al.Improved Allman-free zero-energy mode planar triangle element[J].Journal of Zhengzhou University (Engineering Science),2005,26(04):13.[doi:10.3969/j.issn.1671-6833.2005.01.004]
[8]张小庆,王明中,杜莉莉..加阻尼的Winkler地基上多块板的动力分析[J].郑州大学学报(工学版),2002,23(01):97.[doi:10.3969/j.issn.1671-6833.2002.01.027]
 ZHANG Xiaoqing,Wang Mingzhong,Du Lili.Dynamic analysis of multiple plates on a damped Winkler foundation[J].Journal of Zhengzhou University (Engineering Science),2002,23(04):97.[doi:10.3969/j.issn.1671-6833.2002.01.027]
[9]杨晓东,董斌斌,李倩,等.注塑模CAE有限元网格划分系统[J].郑州大学学报(工学版),1999,20(02):24.[doi:10.3969/j.issn.1671-6833.1999.02.008]
 Yang Xiaodong,DONG Binbin,LI Qian,et al.Injection mold CAE finite element meshing system[J].Journal of Zhengzhou University (Engineering Science),1999,20(04):24.[doi:10.3969/j.issn.1671-6833.1999.02.008]
[10]胡良明,董跃星,周鸿钧.小浪底水利枢纽3号进水塔架的静动力分析[J].郑州大学学报(工学版),1998,19(04):13.
 Hu Liangming,Dong Yuexing,Zhou Hongjun.Analysis of the static power of the water conservancy hub 3 of the small wave bottom 3[J].Journal of Zhengzhou University (Engineering Science),1998,19(04):13.

更新日期/Last Update: 2018-07-24