[1]鹿跃丽,陈江义,张明成,等.牛头刨床六杆机构的优化设计[J].郑州大学学报(工学版),1999,20(03):39-41.[doi:10.3969/j.issn.1671-6833.1999.03.013]
　Lu Yueli,CHEN Jiangyi,ZHANG Mingcheng,et al.Optimized design of the six-bar mechanism of the bull head planer[J].Journal of Zhengzhou University (Engineering Science),1999,20(03):39-41.[doi:10.3969/j.issn.1671-6833.1999.03.013]
点击复制

牛头刨床六杆机构的优化设计()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
20
期数:
1999年03期
页码:
39-41
栏目:
出版日期:
1999-01-01

文章信息/Info

Title:
Optimized design of the six-bar mechanism of the bull head planer
作者:
鹿跃丽; 陈江义; 张明成; 等.
郑州工业大学机械与电子工程学院,河南,郑州,450002
Author(s):
Lu Yueli; CHEN Jiangyi; ZHANG Mingcheng; etc
关键词:
牛头刨床;  优化设计;  压力角;  复合形法
Keywords:
Bullhead planer;  Optimize design;  pressure angle;  Composite shape method
DOI:
10.3969/j.issn.1671-6833.1999.03.013
文献标志码:
A
摘要:
针对牛头刨床中的Ⅱ级六杆机构进行了多项分析与设计;确定了机构最大压力角为最小值的机构设计方案;利用矢量方程解析法对机构进行了运动分析;根据刨削加工时刨头工作速度的要求,建立了以刨头的工作速度平稳性为目标函数的优化设计数学模型,采用复合形法对其进行了优化设计.实例计算的结果表明,经过优化设计的Ⅱ级六杆机构,刨头在工作行程中的速度平稳性得到了明显改善,为提高牛头刨床中Ⅱ级六杆机构的工作质量提供了有效的设计方法,此方法对其他往复运动机构的优化设计也提供了可借鉴的理论依据.
Abstract:
A number of analyses and designs were carried out for the class II. six-pole mechanism in the bull head planer. The mechanism design scheme with the maximum pressure angle of the mechanism as the minimum value was determined; The motion analysis of the mechanism was carried out by the vector equation analysis method. According to the requirements of the working speed of the planer during planing processing, a mathematical model of the optimization design with the smoothness of the working speed of the planer as the objective function is established, and the optimization design is carried out by the composite shape method. The results of the example calculation show that the speed and smoothness of the planer in the working stroke of the optimized design of the class II. six-bar mechanism are significantly improved, which provides an effective design method for improving the working quality of the class II. six-bar mechanism in the bullhead planer, and this method also provides a theoretical basis for the optimization design of other reciprocating motion mechanisms.

相似文献/References:

[1]王东炜,张奇伟,王用中..基于模态分析的鄄城黄河公路大桥优化设计[J].郑州大学学报(工学版),2010,31(06):1.[doi:10.3969/j.issn.1671-6833.2010.06.001]
[2]赵艳敏,霍达..基于遗传模拟退火算法的钢桁架结构优化设计[J].郑州大学学报(工学版),2011,32(06):54.
　ZHAO Yan-min,HUO Da.Optimal Design of Steel Truss Structure Based on Genetic Simulated Annealing Algorithm[J].Journal of Zhengzhou University (Engineering Science),2011,32(03):54.
[3]张三川,张金瑞,李霞..矿用自卸车前推连杆组合式举升机构的优化设计[J].郑州大学学报(工学版),2013,34(02):125.[doi:10.3969/j.issn.1671-6833.2013.00.31]
　ZHANG San-chuan,ZHANG Jin-rui,LI Xia.Optimal Design of the Front Push Rod AssemblyLifting Mechanism on Mining Dump Truck[J].Journal of Zhengzhou University (Engineering Science),2013,34(03):125.[doi:10.3969/j.issn.1671-6833.2013.00.31]
[4]梅钢,徐能雄..深基坑桩锚支护结构优化设计方法及系统研制[J].郑州大学学报(工学版),2008,29(04):124.[doi:10.3969/j.issn.1671-6833.2008.04.029]
　Mei Gang,Xu Nengxiong.Optimization design method and system development of anchor support structure of deep foundation pit pile[J].Journal of Zhengzhou University (Engineering Science),2008,29(03):124.[doi:10.3969/j.issn.1671-6833.2008.04.029]
[5]刘海军,孙尚,许碧娟..双层Kiewitt型球面网壳优化设计[J].郑州大学学报(工学版),2007,28(01):91.[doi:10.3969/j.issn.1671-6833.2007.01.023]
　Liu Haijun,SUN Shang,Xu Bijuan.Optimized design of double-layer Kiewitt spherical mesh shell[J].Journal of Zhengzhou University (Engineering Science),2007,28(03):91.[doi:10.3969/j.issn.1671-6833.2007.01.023]
[6]郭院成,王立明,曾力..基于位移控制的单支点桩锚支护结构的优化设计[J].郑州大学学报(工学版),2004,25(04):4.[doi:10.3969/j.issn.1671-6833.2004.04.002]
　GUO Yuancheng,Wang Liming,Zeng Li.Optimal design of single-fulcrum pile anchor support structure based on displacement control[J].Journal of Zhengzhou University (Engineering Science),2004,25(03):4.[doi:10.3969/j.issn.1671-6833.2004.04.002]
[7]周荣敏,雷延锋..基于遗传算法的雨水管道系统优化设计[J].郑州大学学报(工学版),2003,24(04):59.[doi:10.3969/j.issn.1671-6833.2003.04.014]
　ZHOU Rongmin,Lei Yanfeng.Optimal design of rainwater pipe system based on genetic algorithm[J].Journal of Zhengzhou University (Engineering Science),2003,24(03):59.[doi:10.3969/j.issn.1671-6833.2003.04.014]
[8]李莉,祝芳..扩建给水管网的直接优化计算方法[J].郑州大学学报(工学版),2002,23(04):76.[doi:10.3969/j.issn.1671-6833.2002.04.021]
　LI Li,Zhu Fang.Direct optimization calculation method for expanding the water supply network[J].Journal of Zhengzhou University (Engineering Science),2002,23(03):76.[doi:10.3969/j.issn.1671-6833.2002.04.021]
[9]陈江义,阳培,苏智剑..均匀设计技术在机械设计中的应用[J].郑州大学学报(工学版),2001,22(01):84.[doi:10.3969/j.issn.1671-6833.2001.01.024]
　CHEN Jiangyi,Yangpei,Su Zhijian.Application of uniform design technology in mechanical design[J].Journal of Zhengzhou University (Engineering Science),2001,22(03):84.[doi:10.3969/j.issn.1671-6833.2001.01.024]
[10]李廷占,张明成,王东升..15千瓦圆筒形推拉式磁驱动器的优化设计[J].郑州大学学报(工学版),2001,22(03):53.[doi:10.3969/j.issn.1671-6833.2001.03.016]
　Li Tingzhan,ZHANG Mingcheng,Wang Dongsheng.Optimized design of 15 kW cylindrical push-pull magnetic drives[J].Journal of Zhengzhou University (Engineering Science),2001,22(03):53.[doi:10.3969/j.issn.1671-6833.2001.03.016]

更新日期/Last Update: 1900-01-01