[1]张猛,梁任,赵桂峰.架空导线径向温差及允许载流量研究[J].郑州大学学报(工学版),2020,41(01):1-7.[doi:10.13705/j.issn.1671-6833.2020.01.021]
　Zhang Meng,Liang Ren,Zhao Guifeng.Study on Radial Temperature Distribution and Current-carrying Capacity of Overhead Conductors[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):1-7.[doi:10.13705/j.issn.1671-6833.2020.01.021]
点击复制

架空导线径向温差及允许载流量研究()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
41
期数:
2020年01期
页码:
1-7
栏目:
出版日期:
2020-03-10

文章信息/Info

Title:
Study on Radial Temperature Distribution and Current-carrying Capacity of Overhead Conductors
作者:
张猛; 梁任; 赵桂峰
郑州大学 土木工程学院
Author(s):
Zhang Meng; Liang Ren; Zhao Guifeng
School of Civil Engineering, Zhengzhou University
关键词:
架空导线; 径向温差;  敏感性分析; 允许温度; 允许载流量
Keywords:
overhead conductors; radial temperature difference; sensitivity analysis allowable temperature ; allowable ampacity
DOI:
10.13705/j.issn.1671-6833.2020.01.021
文献标志码:
A
摘要:
以常用的LGJ300/50钢芯铝绞线为例，基于稳态热平衡方程和IEEE Std 738-2012 标准，考虑线股空气间隙和实际接触情况，利用 ANSYS 建立了精细化导线模型，对其径向温差及考虑径向温差时的允许载流量进行了分析。 结果表明：导线运行时存在内部高、表面低的径向温度场，温差可达4~10 ℃ ；导线温度对风速 0~3ｍ/s、风向角 0～45°以及导线直径（型号）较为敏感；径向温差对导线允许载 流量的影响可达10％以上。考虑径向温差时，导线允许温度限值的定义对其允许载流量影响较大，建议将规范规定的导线允许工作温度理解为导线的平均温度。
Abstract:
Accurate understanding of the temperature distribution pattern of overhead conductor cross section can effectively predict the maximum ampacity of current line, and provide basis for real-time dynamic capacity-increase.This paper taking the commonly used conductor LGJ300/50 and LGJ400/35 as examples, based on the conductor steady-state heat balance equation and the IEEE 738-2012 standard, considering the air gap within the conductor and the actual contact between the strands, using the ANSYS software, the radial temperature distribution of overhead conductors and the influence of radial temperature difference on the allowable current carrying capacity of conductors are analyzed. The results show that there is a temperature field along the radial direction when the conductor is running. The temperature difference can reach 4℃~10 ℃, and it has a great influence on the allowable ampacity of the conductor.The definition of allowable temperature limit of conductor has a great influence on the allowable ampacity of the conductor. It is suggested that the allowable temperature limit shall be understood as the average temperature of the conductor.

相似文献/References:

[1]张猛,张玉莹,赵桂峰,等.考虑温度场的架空钢芯铝绞线线股应力研究[J].郑州大学学报(工学版),2018,39(04):7.[doi:10.13705/j.issn.1671-6833.2018.01.031]
　Zhang Meng,Zhang Yuying,Zhao Guifeng,et al.Study on Stress of Overhead Steel Core A luminum Wire Strand Considering the Effect of Temperature Field.[J].Journal of Zhengzhou University (Engineering Science),2018,39(01):7.[doi:10.13705/j.issn.1671-6833.2018.01.031]

更新日期/Last Update: 2020-02-22