相似文献/References:
[1]吕彭民杨龙飞王斌华.变幅宽移动模架结构的有限元分析与试验研究[J].郑州大学学报(工学版),2015,36(02):43.[doi:10.3969/j. issn.1671 -6833.2015.02.010]
LV Peng-min,YANG Long-fei,WANG Bin-hua.Finite Element Analysis and Experimental Study on Structure ofOverhead Launching Gantry with Variable Width[J].Journal of Zhengzhou University (Engineering Science),2015,36(01):43.[doi:10.3969/j. issn.1671 -6833.2015.02.010]
[2]胡雪芳.基于有限元法的某SUV后部碰撞分析研究[J].郑州大学学报(工学版),2016,37(01):54.[doi:10.3969/j.issn.1671-6833.2016.01.012]
Hu Xuefang.Research and analysis of a SUV rear collision based on FEM[J].Journal of Zhengzhou University (Engineering Science),2016,37(01):54.[doi:10.3969/j.issn.1671-6833.2016.01.012]
[3]李景丽,郭丽莹,武东亚,等.考虑土壤电离的接地装置冲击特性分析[J].郑州大学学报(工学版),2016,37(04):20.[doi:10.13705/j.issn.1671-6833.2016.04.005]
Li Jingli,Guo Liying,Wu Dongya,et al.The Analysis of the Grounding Device’s Impulse Characteristics Considering Transient Ionization Phenomenon of Soil[J].Journal of Zhengzhou University (Engineering Science),2016,37(01):20.[doi:10.13705/j.issn.1671-6833.2016.04.005]
[4]胡业发,王彬,张锦光,等.基于FBG传感的CFRP层合板低速冲击响应监测[J].郑州大学学报(工学版),2018,39(03):82.[doi:10.13705/j.issn.1671-6833.2017.06.024]
Hu Yefa,Wang Bin,Zhang Jinguang,et al.Montoring of CFRP Laninate under Low Velocity Impact Based on FBG Sensors[J].Journal of Zhengzhou University (Engineering Science),2018,39(01):82.[doi:10.13705/j.issn.1671-6833.2017.06.024]
[5]袁守利,林家辉.FSAE方程式赛车车架的设计与轻量化[J].郑州大学学报(工学版),2018,39(04):18.[doi:10.13705/j.issn.1671-6833.2018.01.005]
Yuan Shouli,Lam Ka Fai.The Design of FSAE Formula Frame Light weight[J].Journal of Zhengzhou University (Engineering Science),2018,39(01):18.[doi:10.13705/j.issn.1671-6833.2018.01.005]
[6]王刚,宋建,张建伟,等.基于多晶体模型的18CrNiMo7-6合金钢本构参数确定[J].郑州大学学报(工学版),2020,41(02):38.[doi:10.13705/j.issn.1671-6833.2020.03.005]
Wang Gang,Song Jian,Zhang Jianwei,et al.Constitutive Parameters of 18CrNiMo7-6 Alloy Determined by a Polycrystalline Model[J].Journal of Zhengzhou University (Engineering Science),2020,41(01):38.[doi:10.13705/j.issn.1671-6833.2020.03.005]
[7]梁 岩,赵正豪,杜晓溪,等.预应力系梁基础斜柱钢结构施工全过程受力分析[J].郑州大学学报(工学版),2022,43(05):78.[doi:10.13705/j.issn.1671-6833.2022.05.011]
LIANG Yan,ZHAO Zhenghao,DU Xiaoxi,et al.Analysis of the Forces in the Whole Construction Process of the Inclined Column Steel Structure of the Prestressed Beam Foundation[J].Journal of Zhengzhou University (Engineering Science),2022,43(01):78.[doi:10.13705/j.issn.1671-6833.2022.05.011]
[8]岑少起,李伟,华绍杰,等.周向进油、浅腔节流的动静压滑动轴承的有限元－优化综合分析[J].郑州大学学报(工学版),1996,17(02):28.
Cen Shaoqi,Li Wei,Hua Shaojie,et al.Zhou Xiangjin, shallow cavity throwing dynamic static pressure sliding bearing of the finite element -optimized comprehensive analysis[J].Journal of Zhengzhou University (Engineering Science),1996,17(01):28.
[9]龚绍熙,唐克强.简支墙梁工作特性和计算方法的实验研究和有限元分析[J].郑州大学学报(工学版),1988,9(03):1.
[J].Journal of Zhengzhou University (Engineering Science),1988,9(01):1.