[1]张恒,张力,王相乾.模具用金属颗粒/树脂复合材料弹性模量的随机边界元计算[J].郑州大学学报(工学版),1997,18(04):55-59.
 Zhang Heng,tension,and kings coexistence.Calculate the elasticity of metal particles/resin composite materials for mold[J].Journal of Zhengzhou University (Engineering Science),1997,18(04):55-59.
点击复制

模具用金属颗粒/树脂复合材料弹性模量的随机边界元计算()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
18
期数:
1997年04期
页码:
55-59
栏目:
出版日期:
1997-07-31

文章信息/Info

Title:
Calculate the elasticity of metal particles/resin composite materials for mold
作者:
张恒张力王相乾
洛阳工学院复合材料研究所
Author(s):
Zhang Heng tension and king’s coexistence
Luoyang Institute of Technology Composite Materials Research Institute
关键词:
复合材料弹性模量模具
Keywords:
Composite materials elastic modulus mold
文献标志码:
A
摘要:
提出一种把弹性静力学多区域组合边界元和数理统计理论相结合的方法,用于计算模具用金属颗料/树脂复合材料的宏观弹性模量。实测结果和计算结果吻合较好。
Abstract:
It proposes a method of combining the elastic static multi -regional combination boundary and mathematical statistical theory to calculate the macroex modulus of the mold of the mold / resin composite material for the mold. The measured results and calculation results are better.

相似文献/References:

[1]郭文辉,李成.采用流固耦合方法的复合材料层合板鸟撞分析[J].郑州大学学报(工学版),2015,36(06):76.[doi:10.3969 / j. issn.1671 -6833.2015.06.015]
 LI Cheng,GUo Wenhui,TIE Ying.Analysis of bird impact on composite laminates by fluid-solid coupling method[J].Journal of Zhengzhou University (Engineering Science),2015,36(04):76.[doi:10.3969 / j. issn.1671 -6833.2015.06.015]
[2]李海涛,苏靖文,魏冬冬,等.基于大尺度试件重组竹各向轴压力学性能研究[J].郑州大学学报(工学版),2016,37(02):67.[doi:10.3969/j.issn.1671-6833.201412053]
 Li Haitao,Su Jingwen,Wei Dongdong,et al.Comparison Study on Parallel Bamboo Strand Lumber under Axial Compression for Different Directions Based on the Large Scale[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):67.[doi:10.3969/j.issn.1671-6833.201412053]
[3]孙斌,郭伟,顾建兵,等.氧化石墨烯/丁苯橡胶复合材料力学性能的分子动力学模拟[J].郑州大学学报(工学版),2019,40(01):87.[doi:10.13705/j.issn.1671-6833.2019.01.008]
 Sun Bin,Guo Wei,Gu Jianbing,et al.Molecular Dynamics Simulation of Mechanical Properties of Graphene Oxide/Styrene Butadiene Rubber Composites[J].Journal of Zhengzhou University (Engineering Science),2019,40(04):87.[doi:10.13705/j.issn.1671-6833.2019.01.008]
[4]黄嘉钰,刘元珍,高宇璇,等.再生粗骨料取代率对再生保温混凝土徐变影响的研究[J].郑州大学学报(工学版),2021,42(05):68.[doi:10.13705/j.issn.1671-6833.2021.05.001]
 Huang Jiayu,Liu Yuanzhen,Gao Yuxuan,et al.Study on Influence of Recycled Coarse Aggregate Replacement Rate on Creep of Recycled Thermal Insulation Concrete[J].Journal of Zhengzhou University (Engineering Science),2021,42(04):68.[doi:10.13705/j.issn.1671-6833.2021.05.001]
[5]刘华峰,赵凯辉,王佩艳,等.缝合复合材料泡沫夹层结构侧压剪切力学性能试验研究[J].郑州大学学报(工学版),2011,32(04):18.[doi:10.3969/j.issn.1671-6833.2011.04.005]
[6]卫军.关于砼的弹性模量与强度的关系之探讨[J].郑州大学学报(工学版),1987,8(03):10.
 [J].Journal of Zhengzhou University (Engineering Science),1987,8(04):10.
[7]张松森.防辐射复合材料的性能研究[J].郑州大学学报(工学版),1988,9(04):110.
 [J].Journal of Zhengzhou University (Engineering Science),1988,9(04):110.

备注/Memo

备注/Memo:
作者
更新日期/Last Update: 1900-01-01