[1]杨晓东,董斌斌,李倩,等.注塑模CAE有限元网格划分系统[J].郑州大学学报(工学版),1999,20(02):24-26.[doi:10.3969/j.issn.1671-6833.1999.02.008]
　Yang Xiaodong,DONG Binbin,LI Qian,et al.Injection mold CAE finite element meshing system[J].Journal of Zhengzhou University (Engineering Science),1999,20(02):24-26.[doi:10.3969/j.issn.1671-6833.1999.02.008]
点击复制

注塑模CAE有限元网格划分系统()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
20
期数:
1999年02期
页码:
24-26
栏目:
出版日期:
1999-01-01

文章信息/Info

Title:
Injection mold CAE finite element meshing system
作者:
杨晓东; 董斌斌; 李倩; 等.
郑州工业大学橡塑模具国家工程研究中心,河南郑州,450002
Author(s):
Yang Xiaodong; DONG Binbin; LI Qian; etc
关键词:
有限元;  网格划分;  注塑模
Keywords:
DOI:
10.3969/j.issn.1671-6833.1999.02.008
文献标志码:
A
摘要:
根据注塑模CAE分析的特点,采用Delaunay三角化方法,并引入网格尺寸控制函数,对平面和曲面进行高质量的网格划分,在此基础上开发了功能强大的有限元网格划分系统.实例证明,本系统不仅能完成等尺寸三角形网格的划分,而且实现了变尺寸三角形网格的划分,可灵活地控制三角形的生成,满足用户的不同需要.
Abstract:
According to the characteristics of CAE analysis of injection molds, a powerful finite element meshing system was developed on the basis of Delaunay triangulation method and the introduction of mesh size control function to mesh planes and surfaces with high quality. The example proves that the system can not only complete the division of the equal size triangle mesh, but also realize the division of the variable size triangle mesh, which can flexibly control the generation of triangle to meet the different needs of users.

相似文献/References:

[1]吴素珍,何卫东.RV针摆传动齿面接触强度非线性分析[J].郑州大学学报(工学版),2015,36(04):100.[doi:10.3969/ j.issn.1671 -6833.2015.04.023]
　WU Su-zhen,HE Wei-dong.On the Nonlinear Analysis of Contact Strength of Cycloid-pinGear Transmission Surface[J].Journal of Zhengzhou University (Engineering Science),2015,36(02):100.[doi:10.3969/ j.issn.1671 -6833.2015.04.023]
[2]李宇.大跨连续梁桥施工膺架的设计研究[J].郑州大学学报(工学版),2016,37(02):77.[doi:10.3969/j.issn.1671-6833.201505033]
　Li Yu.Research on Optimization Design for Constructive Rack of Long-span continuous beam bridge[J].Journal of Zhengzhou University (Engineering Science),2016,37(02):77.[doi:10.3969/j.issn.1671-6833.201505033]
[3]闫安志,陶天增,张振华.端部质量对有无损伤悬臂梁的模态影响分析[J].郑州大学学报(工学版),2016,37(05):39.[doi:10.13705/j.issn.1671-6833.2016.05.008]
　Yan Anzhi,Tao Tianzeng,Zhang Zhenhua.The mode analysis of the cantilever beam with concentrated mass on its free end in the case of with and without damage[J].Journal of Zhengzhou University (Engineering Science),2016,37(02):39.[doi:10.13705/j.issn.1671-6833.2016.05.008]
[4]朱强,杜鹏,王建军,等.特殊螺纹套管接头柱面/球面密封结构有限元分析[J].郑州大学学报(工学版),2016,37(05):82.[doi:10.13705/j.issn.1671-6833.2016.05.016]
　Zhu Qiang,Du Peng,Wang Jianjun,et al.Sealability Analysis of Premium Connection with Cylinder/Sphere Sealing Structure Based on FEM[J].Journal of Zhengzhou University (Engineering Science),2016,37(02):82.[doi:10.13705/j.issn.1671-6833.2016.05.016]
[5]王衡,陈廷国.基于数值计算的矩形孔蜂窝梁应力分布规律研究[J].郑州大学学报(工学版),2016,37(06):58.[doi:10.13705/j.issn.1671-6833.2016.03.029]
　Wang Heng,Chen Tingguo.Research on the Stress Distribution of Rectangular Hole Castellated Beams based on Numerical Calculation[J].Journal of Zhengzhou University (Engineering Science),2016,37(02):58.[doi:10.13705/j.issn.1671-6833.2016.03.029]
[6]张猛,张玉莹,赵桂峰,等.考虑温度场的架空钢芯铝绞线线股应力研究[J].郑州大学学报(工学版),2018,39(04):7.[doi:10.13705/j.issn.1671-6833.2018.01.031]
　Zhang Meng,Zhang Yuying,Zhao Guifeng,et al.Study on Stress of Overhead Steel Core A luminum Wire Strand Considering the Effect of Temperature Field.[J].Journal of Zhengzhou University (Engineering Science),2018,39(02):7.[doi:10.13705/j.issn.1671-6833.2018.01.031]
[7]李通、时强、王新武、叶重阳.耗能梁段腹板开孔对偏心支撑钢框架抗震性能影响[J].郑州大学学报(工学版),2021,42(02):38.[doi:10.13705/j.issn.1671-6833.2021.02.011]
　Li Tong,Shiqiang,Wang Xinwu,et al.Influence of Web Openings of Link on Seismic Behavior of Eccentrically Braced Steel Frames[J].Journal of Zhengzhou University (Engineering Science),2021,42(02):38.[doi:10.13705/j.issn.1671-6833.2021.02.011]
[8]高丹盈,杨素娟,李占松,等.南水北调大沙河渠道排水非稳定渗流计算分析[J].郑州大学学报(工学版),2010,31(05):27.[doi:10.3969/j.issn.1671-6833.2010.05.007]
[9]申长雨,黄明,赵振峰,等.改进的Allman无零能模式平面三角形单元[J].郑州大学学报(工学版),2005,26(01):13.[doi:10.3969/j.issn.1671-6833.2005.01.004]
　Shen Changyu,HUANG Ming,ZHAO Zhenfeng,et al.Improved Allman-free zero-energy mode planar triangle element[J].Journal of Zhengzhou University (Engineering Science),2005,26(02):13.[doi:10.3969/j.issn.1671-6833.2005.01.004]
[10]张小庆,王明中,杜莉莉..加阻尼的Winkler地基上多块板的动力分析[J].郑州大学学报(工学版),2002,23(01):97.[doi:10.3969/j.issn.1671-6833.2002.01.027]
　ZHANG Xiaoqing,Wang Mingzhong,Du Lili.Dynamic analysis of multiple plates on a damped Winkler foundation[J].Journal of Zhengzhou University (Engineering Science),2002,23(02):97.[doi:10.3969/j.issn.1671-6833.2002.01.027]

更新日期/Last Update: 1900-01-01