[1]赖永星,成立社,张侃..进水塔复杂结构的有限元分析[J].郑州大学学报(工学版),1999,20(04):22-24.[doi:10.3969/j.issn.1671-6833.1999.04.007]
 Lai Yongxing,Establishment of a society,Zhang Kan.Finite element analysis of complex structure of inlet tower[J].Journal of Zhengzhou University (Engineering Science),1999,20(04):22-24.[doi:10.3969/j.issn.1671-6833.1999.04.007]
点击复制

进水塔复杂结构的有限元分析()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
20
期数:
1999年04期
页码:
22-24
栏目:
出版日期:
1999-01-01

文章信息/Info

Title:
Finite element analysis of complex structure of inlet tower
作者:
赖永星成立社张侃.
郑州工业大学数理力学系,河南,郑州,450002, 郑州市第二建筑工程公司,河南,郑州,450002
Author(s):
Lai Yongxing; Establishment of a society; Zhang Kan
关键词:
进水塔 有限元 应力 变形
Keywords:
DOI:
10.3969/j.issn.1671-6833.1999.04.007
文献标志码:
A
摘要:
某水库泄洪工程进水塔为大体积的混凝土结构,体型、受力情况及边界条件都较复杂,塔体下部具有较大孔口泄洪引水流道,基岩较软.根据进水塔的结构特点,利用空间块体单元对进水塔进行有限元离散,计算了该进水塔在7种工况下的强度与变形,给出了几个典型截面的应力等值线图,得出一些可作为设计依据的有益结论.
Abstract:
The inlet tower of a reservoir flood discharge project is a large-volume concrete structure, with complex body size, force and boundary conditions, and the lower part of the tower body has a large orifice flood discharge channel, and the bedrock is soft. According to the structural characteristics of the inlet tower, the finite element discretization of the inlet tower is carried out by using the space block unit, the strength and deformation of the inlet tower under seven working conditions are calculated, and the stress contour diagrams of several typical cross-sections are given, and some useful conclusions can be used as the design basis.

相似文献/References:

[1]莫石秀,郭月芹..隔热板埋深对冻土路基温度场的影响分析[J].郑州大学学报(工学版),2010,31(03):77.[doi:10.3969/j.issn.1671-6833.2010.03.020]
 Mo Shixiu,Guo Yueqin.Analysis of the influence of buried depth of heat insulation board on the temperature field of frozen soil subgrade[J].Journal of Zhengzhou University (Engineering Science),2010,31(04):77.[doi:10.3969/j.issn.1671-6833.2010.03.020]
[2]张军,张恒,张洛明,等.基于接触的销钉孔塑性变形分析[J].郑州大学学报(工学版),2010,31(04):81.[doi:10.3969/j.issn.1671-6833.2010.04.020]
[3]张俊光,刘永健,姚晓荣,等.刚性悬索加劲钢桁梁桥结构参数敏感性分析[J].郑州大学学报(工学版),2010,31(05):55.[doi:10.3969/j.issn.1671-6833.2010.05.014]
[4]李清富,辛保兵,李科..基于SVM的预应力混凝土梁有效预应力识别[J].郑州大学学报(工学版),2011,32(01):18.[doi:10.3969/j.issn.1671-6833.2011.01.005]
[5]雷少敏,唐华平,朱维南..3ZX平面铣床横梁有限元分析及优化研究[J].郑州大学学报(工学版),2011,32(03):60.[doi:10.3969/j.issn.1671-6833.2011.03.015]
[6]周灿,王建军,邓圭玲..高速机床恒定循环水温暖机的仿真与实验研究[J].郑州大学学报(工学版),2011,32(05):121.[doi:10.3969/j.issn.1671-6833.2011.05.030]
[7]李成,朱红红,铁瑛,等.销钉连接接触面的应力有限元计算与分析[J].郑州大学学报(工学版),2012,33(01):84.[doi:10.3969/j.issn.1671-6833.2012.01.021]
 LI Cheng,ZHU Honghong,TIE Ying,et al.Stress Calculation and Analysis of Connection Interface of Pin Joints with FEM[J].Journal of Zhengzhou University (Engineering Science),2012,33(04):84.[doi:10.3969/j.issn.1671-6833.2012.01.021]
[8]吴梦喜,邓琴芳,黄艳北..堤基管涌动态发展的数值模拟[J].郑州大学学报(工学版),2012,33(05):66.[doi:10.3969/j.issn.1671-6833.2012.05.015]
 WU Mengxi,DENG Qinfang,HUANG Yanbei.Numerical Simulation of the Dynamic Process of Levee Foundation Piping[J].Journal of Zhengzhou University (Engineering Science),2012,33(04):66.[doi:10.3969/j.issn.1671-6833.2012.05.015]
[9]韩增盛,马松花..地铁车辆吸能装置耐碰撞性分析[J].郑州大学学报(工学版),2012,33(06):41.[doi:10.3969/j.issn.1671-6833.2012.06.010]
 HAN Zengsheng,MA Songhua.Analysis of Crashworthiness of Energy-Absorbing Componentin the Metro Vehicle Car-body[J].Journal of Zhengzhou University (Engineering Science),2012,33(04):41.[doi:10.3969/j.issn.1671-6833.2012.06.010]
[10]周淑芬,郝宪武,李子青,等.钢管混凝土桥墩在长联低墩连续刚构桥中的应用研究[J].郑州大学学报(工学版),2013,34(01):27.[doi:10.3969/j.issn.1671-6833.2013.01.007]
 ZHOU Shu-fen,HAO Xian-wu,LI Zi-qing,et al.Application and Research of Concrete - filled Steel Bridge Piers in Long Spanand Low Pier Continuous Rigid Frame Bridge[J].Journal of Zhengzhou University (Engineering Science),2013,34(04):27.[doi:10.3969/j.issn.1671-6833.2013.01.007]

更新日期/Last Update: 1900-01-01