[1]张小庆,王明中,杜莉莉..加阻尼的Winkler地基上多块板的动力分析[J].郑州大学学报(工学版),2002,23(01):97-100.[doi:10.3969/j.issn.1671-6833.2002.01.027]
　ZHANG Xiaoqing,Wang Mingzhong,Du Lili.Dynamic analysis of multiple plates on a damped Winkler foundation[J].Journal of Zhengzhou University (Engineering Science),2002,23(01):97-100.[doi:10.3969/j.issn.1671-6833.2002.01.027]
点击复制

加阻尼的Winkler地基上多块板的动力分析()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
23
期数:
2002年01期
页码:
97-100
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
Dynamic analysis of multiple plates on a damped Winkler foundation
作者:
张小庆; 王明中; 杜莉莉.
大连理工大学土木工程学院,辽宁,大连,116023, 郑州市污水净化有限公司,河南,郑州450045
Author(s):
ZHANG Xiaoqing; Wang Mingzhong; Du Lili
关键词:
有限元;  落锤式弯沉仪;  多块基础板;  时域
Keywords:
DOI:
10.3969/j.issn.1671-6833.2002.01.027
文献标志码:
A
摘要:
多块板之间的接缝传荷及其与地基相互作用的动力时域问题是刚性路面和机场进行无损检测和评价中的一个重要问题.利用有限元方法,通过对各板隔离分析并将相应矩阵进行扩充,使得具有结缝的不连续问题可以像连续问题一样进行有限元分析计算.该方法不仅可用于求解多块板系统的静力问题、频域下动力问题,将地基简化为弹簧和阻尼器,可成功地用于动力时域问题.
Abstract:
The dynamic time domain problem of joint load transfer between multiple plates and its interaction with the foundation is an important problem in the non-destructive testing and evaluation of rigid pavements and airports. Using the finite element method, by isolating each plate and expanding the corresponding matrix, the discontinuous problem with seams can be analyzed and calculated like a continuous problem. This method can not only be used to solve the static problem of multi-plate system and the dynamic problem in the frequency domain, but also simplifies the foundation into spring and damper, which can be successfully used for the dynamic time domain problem.

相似文献/References:

[1]吴素珍,何卫东.RV针摆传动齿面接触强度非线性分析[J].郑州大学学报(工学版),2015,36(04):100.[doi:10.3969/ j.issn.1671 -6833.2015.04.023]
　WU Su-zhen,HE Wei-dong.On the Nonlinear Analysis of Contact Strength of Cycloid-pinGear Transmission Surface[J].Journal of Zhengzhou University (Engineering Science),2015,36(01):100.[doi:10.3969/ j.issn.1671 -6833.2015.04.023]
[2]李宇.大跨连续梁桥施工膺架的设计研究[J].郑州大学学报(工学版),2016,37(02):77.[doi:10.3969/j.issn.1671-6833.201505033]
　Li Yu.Research on Optimization Design for Constructive Rack of Long-span continuous beam bridge[J].Journal of Zhengzhou University (Engineering Science),2016,37(01):77.[doi:10.3969/j.issn.1671-6833.201505033]
[3]闫安志,陶天增,张振华.端部质量对有无损伤悬臂梁的模态影响分析[J].郑州大学学报(工学版),2016,37(05):39.[doi:10.13705/j.issn.1671-6833.2016.05.008]
　Yan Anzhi,Tao Tianzeng,Zhang Zhenhua.The mode analysis of the cantilever beam with concentrated mass on its free end in the case of with and without damage[J].Journal of Zhengzhou University (Engineering Science),2016,37(01):39.[doi:10.13705/j.issn.1671-6833.2016.05.008]
[4]朱强,杜鹏,王建军,等.特殊螺纹套管接头柱面/球面密封结构有限元分析[J].郑州大学学报(工学版),2016,37(05):82.[doi:10.13705/j.issn.1671-6833.2016.05.016]
　Zhu Qiang,Du Peng,Wang Jianjun,et al.Sealability Analysis of Premium Connection with Cylinder/Sphere Sealing Structure Based on FEM[J].Journal of Zhengzhou University (Engineering Science),2016,37(01):82.[doi:10.13705/j.issn.1671-6833.2016.05.016]
[5]王衡,陈廷国.基于数值计算的矩形孔蜂窝梁应力分布规律研究[J].郑州大学学报(工学版),2016,37(06):58.[doi:10.13705/j.issn.1671-6833.2016.03.029]
　Wang Heng,Chen Tingguo.Research on the Stress Distribution of Rectangular Hole Castellated Beams based on Numerical Calculation[J].Journal of Zhengzhou University (Engineering Science),2016,37(01):58.[doi:10.13705/j.issn.1671-6833.2016.03.029]
[6]张猛,张玉莹,赵桂峰,等.考虑温度场的架空钢芯铝绞线线股应力研究[J].郑州大学学报(工学版),2018,39(04):7.[doi:10.13705/j.issn.1671-6833.2018.01.031]
　Zhang Meng,Zhang Yuying,Zhao Guifeng,et al.Study on Stress of Overhead Steel Core A luminum Wire Strand Considering the Effect of Temperature Field.[J].Journal of Zhengzhou University (Engineering Science),2018,39(01):7.[doi:10.13705/j.issn.1671-6833.2018.01.031]
[7]李通、时强、王新武、叶重阳.耗能梁段腹板开孔对偏心支撑钢框架抗震性能影响[J].郑州大学学报(工学版),2021,42(02):38.[doi:10.13705/j.issn.1671-6833.2021.02.011]
　Li Tong,Shiqiang,Wang Xinwu,et al.Influence of Web Openings of Link on Seismic Behavior of Eccentrically Braced Steel Frames[J].Journal of Zhengzhou University (Engineering Science),2021,42(01):38.[doi:10.13705/j.issn.1671-6833.2021.02.011]
[8]高丹盈,杨素娟,李占松,等.南水北调大沙河渠道排水非稳定渗流计算分析[J].郑州大学学报(工学版),2010,31(05):27.[doi:10.3969/j.issn.1671-6833.2010.05.007]
[9]申长雨,黄明,赵振峰,等.改进的Allman无零能模式平面三角形单元[J].郑州大学学报(工学版),2005,26(01):13.[doi:10.3969/j.issn.1671-6833.2005.01.004]
　Shen Changyu,HUANG Ming,ZHAO Zhenfeng,et al.Improved Allman-free zero-energy mode planar triangle element[J].Journal of Zhengzhou University (Engineering Science),2005,26(01):13.[doi:10.3969/j.issn.1671-6833.2005.01.004]
[10]杨晓东,董斌斌,李倩,等.注塑模CAE有限元网格划分系统[J].郑州大学学报(工学版),1999,20(02):24.[doi:10.3969/j.issn.1671-6833.1999.02.008]
　Yang Xiaodong,DONG Binbin,LI Qian,et al.Injection mold CAE finite element meshing system[J].Journal of Zhengzhou University (Engineering Science),1999,20(01):24.[doi:10.3969/j.issn.1671-6833.1999.02.008]

更新日期/Last Update: 1900-01-01